Tribological Characterization of Ni-Free Duplex Stainless Steel Alloys Using the Taguchi Methodology
نویسندگان
چکیده
منابع مشابه
Production and Characterization of Stainless Steel Based Fe-Cr-Ni-Mn-Si(-CO) Shape Memory Alloys
It is well known that the Fe based alloys can exhibit shape memory effect due to the y to E martensitic transformation. The effect may not be as striking as observed in the NiTi alloy but it might become attractive fkom the practical point of view. In this work, two compositions of Fe-Cr-Ni-Mn-Si(-Co) stainless steel based shape memory alloy, prepared by the VIM technique, will be presented. Th...
متن کاملElectrochemical and Tribological Behaviour of Oxide Dispersion Strengthened Duplex Stainless Steel in Mine Water Environment
Abstract This work investigated the electrochemical and aqueous tribological behavior of hot pressed 2205 duplex stainless steel (DSS). DSS sintered composites of different volume percent (% vol) of partially stabilized zirconia (PSZ) was developed using powder metallurgy (PM) technique. Electrochemical behaviour was studied at room temperature, using open circuit potential and potentiody...
متن کاملSurface Texturing-Plasma Nitriding Duplex Treatment for Improving Tribological Performance of AISI 316 Stainless Steel
Surface texturing-plasma nitriding duplex treatment was conducted on AISI 316 stainless steel to improve its tribological performance. Tribological behaviors of ground 316 substrates, plasma-nitrided 316 (PN-316), surface-textured 316 (ST-316), and duplex-treated 316 (DT-316) in air and under grease lubrication were investigated using a pin-on-disc rotary tribometer against counterparts of high...
متن کاملMaterial Characterization of Duplex Stainless Steel by Superplastic Free Bulging Test
Macroscopic superplastic behaviour of metallic or non metallic materials is usually represented by the strain rate sensitivity, and it can be determined by tensile tests at elevated temperature. However, a uniaixal stress state occurs in the test whilst a multiaixal stress state is induced in actual superplastic forming processes. The difference of the stress state might affect the reliability ...
متن کاملSurface Characterization and Tribological Behaviour of Ti-Ni-P Intermetallic Coatings on Titanium Alloys
In this research, tribological behavior of Ti-Ni-P intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. Hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. In this respect, th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10030339