TRIBOLOGICAL PROPERTIES OF ALUMINA-ZIRCONIA COMPOSITE COATINGS PREPARED BY PLASMA SPRAYING
نویسندگان
چکیده
منابع مشابه
Processing and Properties of Zirconia-Toughened Alumina Prepared by Gelcasting
Zirconia-toughened alumina (ZTA) using yttria-stabilised zirconia is a good option for ceramic-ceramic bearing couples for hip joint replacement. Gelcasting is a colloidal processing technique capable of producing complex products with a range of dimensions and materials by a relatively low-cost production process. Using gelcasting, ZTA samples were prepared, optimising the stages of fabricatio...
متن کاملPlasma spraying of micro-composite thermal barrier coatings
The thermal barrier coatings (TBCs) by gas tunnel-type plasma spraying exhibited ceramic-composite features consisting of a host oxide matrix ceramic with an embedded second phase material. The densities of the composite TBC were found to be higher than those sprayed with 100wt% ZrO2 or Al2O3. In the coatings produced with powder mixtures of 50wt%, the embedded splats are found to have a relati...
متن کاملEvaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...
متن کاملWear studies on plasma-sprayed Al2O3 and 8mole% of Yttrium-stabilized ZrO2 composite coating on biomedical Ti-6Al-4V alloy for orthopedic joint application
This paper presents the wear characteristics of the composite ceramic coating made with Al2O3-40wt%8YSZ on the biomedical grade Ti-6Al-4V alloy (grade 5) used for total joint prosthetic components, with the aim of improving their tribological behavior. The coatings were deposited using a plasma spraying technique, and optimization of plasma parameters was performed using response surface method...
متن کاملIn situ Particle Generation and Splat Formation During Solution Precursor Plasma Spraying of YttriaStabilized Zirconia Coatings
Thermal barrier coatings (TBCs) based on Yttria-stabilized Zirconia (YSZ) deposited by the solution precursor plasma spray (SPPS) technique have been claimed to exhibit superior durability compared to conventional plasma spraying and even electron-beam physical vapor deposition. This has been attributed to the interesting features, like vertical cracks, nanosized pores, and fine splats that are...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings on Engineering Sciences
سال: 2019
ISSN: 2620-2832,2683-4111
DOI: 10.24874/pes01.01.025