Tribological properties of ptfe filled with carbon fibers and solid lubricant

Physical and tribological properties of the modified PTFE nanopowder filled EPDM

INTRODUCTION Polytetrafluoroethylene (PTFE), a highly crystalline polymer with melting temperature around 330°C, possesses unique properties. Chemically inert, it has high chemical and heat resistance with upper service temperature around 260°C. Since its invention it has found limited applications especially as an additive because of its high molecular weight and inert surface. However, by mid...

Wear resistant solid lubricant coating made from PTFE and epoxy

A composite coating of polytetrafluoroethylene and epoxy shows 100 · improvements in wear resistance as compared to either of its constituents alone and reduced friction coefficient under testing on a pin-on-disk tribometer. This coating is made by impregnating an expanded PTFE film with epoxy, which provides three unique functions: (1) the epoxy compartmentalizes the PTFE nodes, which is belie...

Cryogenic friction behavior of PTFE based solid lubricant composites

Solid lubricants used in aerospace applications must provide low friction and a predictable operation life over an extreme range of temperatures, environments and contact conditions. PTFE and PTFE composites have shown favorable tribological performance as solid lubricants. This study evaluates the effect of temperature on the friction coefficient of neat PTFE, a PTFE/ PEEK composite and an exp...

Tribological studies of polyphenylene sulfide composites filled with micro/nano particles and reinforced with short fibers or carbon nano-tubes/carbon nano-fibers

single-step synthesis of multi-component spirobarbiturates using ionic liquids and synthesis of substituted pyridine filled with catalysts supported on solid substrate

in this thesis, a better reaction conditions for the synthesis of spirobarbiturates catalyzed by task-specific ionic liquid (2-hydroxy-n-(2-hydroxyethyl)-n,n-dimethylethanaminium formate), calcium hypochlorite ca(ocl)2 or n-bromosuccinimide (nbs) in the presence of water at room temperature by ultrasonic technique is provided. the design and synthesis of spirocycles is a challenging task becaus...