Triple stack glass-to-glass anodic bonding for optogalvanic spectroscopy cells with electrical feedthroughs
نویسندگان
چکیده
منابع مشابه
Glass Substrate with High Density Electrical Feedthroughs
This paper reports a novel method to produce high density feedthrough glass wafers with sufficient thickness for the packaging and interconnection of high density array micro electromechanical systems (MEMSs). Pyrex glass wafers with thin film metal lines on the surface are stacked and bonded with each other using phenyl methyl siloxane-based adhesive. The stacked glass wafer block is then slic...
متن کاملStudy on the Glass Silicon Anodic Direct Bonding Parameters
By MEMS packaging test platform for bonding process of bonding temperature and bonding time, and test silicon specifications experimental study. Experimental results indicate that when the bonding voltage of 1200V, bonding temperature of 445 0 C to 455 0 C, bonding time is 60s, the void fraction is less than 5%. Glass and silicon wafer bonding quality can achieve the best. The experimental resu...
متن کاملA Microsystem Based on Porous Silicon-Glass Anodic Bonding for Gas and Liquid Optical Sensing
We have recently presented an integrated silicon-glass opto-chemical sensor for lab-on-chip applications, based on porous silicon and anodic bonding technologies. In this work, we have optically characterized the sensor response on exposure to vapors of several organic compounds by means of reflectivity measurements. The interaction between the porous silicon, which acts as transducer layer, an...
متن کاملElectrothermal Bonding of Carbon Nanotubes to Glass
Applications that exploit the exceptional properties of carbon nanotubes CNTs at practical length scales almost invariably involve the fundamental issues of nanotube-to-surface contacts; indeed, interface properties often dominate mechanical, electrical, and thermal performance in devices and materials based on CNTs. In this paper we present a method to attach CNTs to glass surfaces and investi...
متن کاملExamination of Glass-Silicon and Glass-Glass Bonding Techniques for Microfluidic Systems
We report here on the results of experiments concerning particular bonding processes potentially useful for ultimate miniaturization of microfluidic systems. Direct anodic bonding of continuous thin Pyrex glass of 250 pm thickness to silicon substrates gives multiple, large voids in the glass. Etchback of thick glass of 1200 pm thickness bonded to silicon substrates gives thin continuous glass ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2014
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.4891534