Tritium Depth Profiles in 316 Stainless Steel
نویسندگان
چکیده
منابع مشابه
The Unified Creep-Fatigue Equation for Stainless Steel 316
Background—The creep-fatigue properties of stainless steel 316 are of interest because of the wide use of this material in demanding service environments, such as the nuclear industry. Need—A number of models exist to describe creep-fatigue behaviours, but they are limited by the need to obtain specialized coefficients from a large number of experiments, which are time-consuming and expensive. ...
متن کاملPHASE TRANSFORMATION DURING WEAR OF AISI STAINLESS STEEL 316
Abstract: Austenitic stainless steels exhibit a low hardness and weak tribological properties. The wear behaviour of austenitic stainless steel AISI 316 was evaluated through the pin on disc tribological method. For investigating the effect of wear on the changes in microstructure and resistance to wear, optical microscopy and scanning electron microscope were used. The hardness of the worn...
متن کاملTemperature Dependence of Residual Stress in Tin Films on 316 Stainless Steel
The residual stresses in a TiN film deposited by a reactive ion coating process on a 316 stainless steel sheet were determined by the sin$ X-ray diffraction method, at temperatures from 15-800 “C. Using specially designed nickel clips, the coated strip was heated by the passage of a resistive current, in conjunction with a surround heater, and the temperature was measured by a Pt/Pt-lO%Rh therm...
متن کاملGrowth inhibition of cultured smooth muscle cells by corrosion products of 316 L stainless steel wire.
The potential cytotoxicity on vascular smooth muscle cells of corrosion products from 316 L stainless steel, one of most popular biomaterials of intravascular stents, has not been highlighted. In this investigation, 316 L stainless steel wires were corroded in Dulbecco's modified eagle's medium with applied constant electrochemical breakdown voltage, and the supernatant and precipitates of corr...
متن کاملLaser surface modification of 316 L stainless steel with bioactive hydroxyapatite.
Laser-engineered net shaping (LENS™), a commercial additive manufacturing process, was used to modify the surfaces of 316 L stainless steel with bioactive hydroxyapatite (HAP). The modified surfaces were characterized in terms of their microstructure, hardness and apatite forming ability. The results showed that with increase in laser energy input from 32 J/mm(2) to 59 J/mm(2) the thickness of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shinku
سال: 2006
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.49.147