Tuning the emission colour by manipulating terbium-terbium interactions: Terbium doped aluminum nitride as an example system

Elastic properties of terbium.

Sodium terbium(III) polyphosphate

Single crystals of the title compound, NaTb(PO(3))(4), were obtained by solid-state reaction. This compound belongs to type II of long-chain polyphosphates with the general formula A(I)B(III)(PO(3))(4). It is isotypic with the NaNd(PO(3))(4) and NaEr(PO(3))(4) homologues. The crystal structure is built up of infinite crenelated chains of corner-sharing PO(4) tetra-hedra with a repeating unit of...

Effective Verdet constant in a terbium-doped-core phosphate fiber.

The concept of an effective Verdet constant is proposed and experimentally validated. The effective Verdet constant of light propagation in a fiber includes contributions from the materials in both the core and the cladding. It is measured in a 25 wt.% terbium-doped-core phosphate fiber to be -6.2+/-0.4 rad/(Tm) at 1,053 nm, which is six times larger than silica fiber. The result agrees well wi...

Terbium-based extreme ultraviolet multilayers.

We have fabricated periodic multilayers that comprise either Si/Tb or SiC/Tb bilayers, designed to operate as narrowband reflective coatings near 60 nm wavelength in the extreme ultraviolet (EUV). We find peak reflectance values in excess of 20% near normal incidence. The spectral bandpass of the best Si/Tb multilayer was measured to be 6.5 nm full width at half-maximum (FWHM), while SiC/Tb mul...

All - fiber Faraday Devices Based on Terbium - doped Fiber

Surface damage is one of the most problematic power limits in high-power fiber laser systems. All-fiber Faraday components are demonstrated as a solution to this problem, since they can be completely fusion-spliced into existing systems, eliminating all glass-air interfaces. Beam filamentation due to self-focusing places another limit on the peak power attainable from fiber laser systems. The l...