Two-Dimensional Infrared Detector Arrays
نویسندگان
چکیده
منابع مشابه
Infrared Detector Arrays for Astronomy
Use of infrared detector arrays in astronomy began roughly 20 years ago, and our detection capabilities in parts of this spectral range have doubled about every seven months since then. A variety of approaches are now used for detector arrays operating from 1 μm to 1 mm and beyond. They include direct hybrid arrays of InSb and HgCdTe photodiodes that operate from 0.6μm to 5μm, and of Si:As impu...
متن کاملTwo Dimensional Generalized Edge Detector
Detecting edges in images is one of the most challenging issue in computer vision and image processing due to lack of a robust detector. Gökmen and Jain [1] have obtained an edge detector called Generalized Edge Detector (GED), capable of producing most of the existing edge detectors. The original problem was formulated on two dimensional Hybrid model [1] comprised of the linear combination of ...
متن کاملSpectral-domain phase microscopy with improved sensitivity using two-dimensional detector arrays.
In this work we demonstrate the use of two-dimensional detectors to improve the signal-to-noise ratio (SNR) and sensitivity in spectral-domain phase microscopy for subnanometer accuracy measurements. We show that an increase in SNR can be obtained, from 82 dB to 105 dB, using 150 pixel lines of a low-cost CCD camera as compared to a single line, to compute an averaged axial scan. In optimal mec...
متن کاملEvaluate The Behavior of PIN infrared detector via COMSOL software
Infrared detectors can be used for a variety of applications such as: using in fiber-optic communications. Conventional technology for IR detectors is using p-i-n structure based on GaAs compound. This paper reports on the design and modeling of an IR detector using a p-i-n GaAs structure. Comsol software is used to simulate the model and the detector is discussed for terminal current, dopant p...
متن کاملComparison of two commercial detector arrays for IMRT quality assurance
Two commercially available detector arrays were compared for their use in the quality assurance of patient-specific IMRT treatment plans: one a diode-based array (MapCHECK) and the other an ion chamber-based array (MatriXX). The dependence of the response of detectors on the field size, dose rate, and radiation energy were measured and compared with reference measurements using a Farmer-type io...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Astronomical Union Colloquium
سال: 1984
ISSN: 0252-9211
DOI: 10.1017/s0252921100108693