Ultra-Thin Films of Poly(acrylic acid)/Silver Nanocomposite Coatings for Antimicrobial Applications
نویسندگان
چکیده
منابع مشابه
Titanium monoxide ultra-thin coatings evaporated onto polycrystalline copper films
We evaporated polycrystalline copper thin films of thickness between 10 and 100nm on silicon substrates with their native oxide under ultra-high-vacuum conditions. Some of them were exposed to air for a period ranging from 1 day to 2 weeks. X-ray photoelectron spectroscopy (XPS) revealed a clean copper surface with a trace of oxygen. These films that were exposed to air presented oxides in the ...
متن کاملNanocomposite Thin Films for both Mechanical and Functional Applications
The design methodology and realization of nanocomposite films aiming for mechanical (superhardness, toughness) and functional (optical, microelectronic) properties were discussed in this paper. Superhard TiCrCN and nc-TiN/a-SiNx films and super-tough nc-TiC/a-C(Al) films were prepared through co-sputtering method by optimal design of microstructure. The nanocrystalline silicon (nc-Si) passivate...
متن کاملInitiated Chemical Vapor Deposition of Functional Polyacrylic Thin Films
Initiated chemical vapor deposition (iCVD) was explored as a novel method for synthesis of functional polyacrylic thin films. The process introduces a peroxide initiator, which can be decomposed at low temperatures (<2000 C) and initialize addition reaction of monomer species. The use of low temperatures limits the decomposition chemistry to the bond scission of initiator, while retaining funct...
متن کاملUltra-sensitive Absorption Diagnostics of Thin Films for High-power Laser Interference Coatings
The goal of this project was to demonstrate a simple method to measure absorption loss in thin dielectrics films, in particular in multilayer coatings for high power lasers in which very low absorption losses are required. The absorption characterization method is a photo-thermal technique based on thermal lensing. The method measures the defocusing of an incident probe beam caused by a thermal...
متن کاملLaser processing of polymer nanocomposite thin films
Current biotechnology and sensor research has enhanced the drive to establish viable methods for depositing high-quality polymer thin films. In this research, thin films of poly methyl methacrylate PMMA were prepared by matrix-assisted pulsed-laser evaporation MAPLE . Up to 2 wt % of carbon nanotubes were subsequently added to MAPLE target systems for deposition of polymer nanocomposite films. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Spectroscopy
سال: 2016
ISSN: 2314-4920,2314-4939
DOI: 10.1155/2016/7489536