Ultrafast-laser powder bed fusion of oxygen-deficient Nb2O5 ceramics with highly improved electrical properties

نویسندگان

چکیده

• Optimized ultrafast-laser powder bed processing produces uniform and compact sintered layers of niobium oxide. Microstructure anisotropy the can be controlled with laser conditions. Laser enables stabilizing a monoclinic oxygen-deficient phase. oxygen-deficiency determine electrical properties material. The material resistivity decreases by more than eight orders magnitude upon treatment. In this work, Nb 2 O 5 highly improved respect to pristine have been produced fusion process. conditions required for producing from studied optimized . It has established that irradiation, performed in air at room temperature, leads formation dense high temperature crystal structure (H-Nb ) but oxygen deficient. show preferential orientation short axis lying plane. This irradiation Anisotropic observed as consequence induced microstructure, while overall is decreased due deficiency. These results indicate it feasible use ultrafast promote high-temperature non-stoichiometric oxide phases few seconds low energy consumption. irradiated are extremely interesting different electronic sensing applications.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

control of the optical properties of nanoparticles by laser fields

در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...

15 صفحه اول

Study of the Microstructure and Cracking Mechanisms of Hastelloy X Produced by Laser Powder Bed Fusion

Hastelloy X (HX) is a Ni-based superalloy which suffers from high crack susceptibility during the laser powder bed fusion (LPBF) process. In this work, the microstructure of as-built HX samples was rigorously investigated to understand the main mechanisms leading to crack formation. The microstructural features of as-built HX samples consisted of very fine dendrite architectures with dimensions...

متن کامل

Thermographic Measurements of the Commercial Laser Powder Bed Fusion Process at NIST.

Measurement of the high-temperature melt pool region in the laser powder bed fusion (L-PBF) process is a primary focus of researchers to further understand the dynamic physics of the heating, melting, adhesion, and cooling which define this commercially popular additive manufacturing process. This paper will detail the design, execution, and results of high speed, high magnification in-situ the...

متن کامل

Functionalization of Biomedical Ti6Al4V via In Situ Alloying by Cu during Laser Powder Bed Fusion Manufacturing

The modern medical industry successfully utilizes Laser Powder Bed Fusion (LPBF) to manufacture complex custom implants. Ti6Al4V is one of the most commonly used biocompatible alloys. In surgery practice, infection at the bone-implant interface is one of the key reasons for implant failure. Therefore, advanced implants with biocompatibility and antibacterial properties are required. Modificatio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials & Design

سال: 2022

ISSN: ['1873-4197', '0264-1275']

DOI: https://doi.org/10.1016/j.matdes.2022.111346