Ultrasonic Atomization Using a Micro Nozzle Array
نویسندگان
چکیده
منابع مشابه
A Phased Array Ultrasonic Testing Technique for the Inspection of Nozzle Welds in the Nuclear Industry
Regular, in-service inspection is important to verify the integrity of welded nozzle sections in the nuclear industry. Nozzle sections are susceptible to crack growth due to thermal fatigue and stress corrosion. Early detection of cracks is therefore essential to ensure the continued safe operation of the facility. The aim of this project is to design an inspection system that is capable of red...
متن کاملNozzle Fabrication for Micro Propulsion of a Micro Satellite
⎯ To enable formation flying of micro satellites, small sized propulsion systems are required. Our research focuses on the miniaturization of a feeding and thruster system by means of micro system technology (MST). Three fabrication methods have been investigated to make a conical converging-diverging nozzle. These methods are reactive ion etching, femtosecond laser machining (FLM) and a combin...
متن کاملEffusive atomic oven nozzle design using an aligned microcapillary array.
We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design, we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525 °C, the collimated atomic beam flux directly after the nozzle is 1.2 × 10(14) atoms/s with a peak beam ...
متن کاملSingle Crystal Turbine Blade Inspection Using a 2d Ultrasonic Array
In this paper a non-destructive method for inspecting jet-engine turbine blades for root cracking is developed. This method utilises 2D ultrasonic arrays to enable the detection and characterisation of sub-surface cracks in three-dimensions. The majority of modern turbine blades are manufactured from single crystals of nickel based superalloys which exhibit high elastic anisotropy. This complic...
متن کاملPhased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2007
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.73.622