Ultrasonic Characterization of Microstructure in Powder Metal Alloy
نویسندگان
چکیده
منابع مشابه
Ultrasonic characterization of microstructure evolution during processing
Ultrasonic characterization of microstructure evolution during processing" (2007). Many cold-working processes for polycrystalline metals cause alignment of the grains with a single symmetry axis. This type of microstructure is called fiber texture. The existence of a preferred orientation of the grains has a significant influence on the propagation and scattering of ultrasonic waves, which are...
متن کاملCharacterization of the microstructure, tensile and creep behavior of powder metallurgy processed and rolled Ti-6Al-4V-1B Alloy
This work investigated the microstructure and elevated-temperature (400-475C) tensile and tensile-creep deformation behavior of a powder metallurgy (PM) rolled Ti-6Al-4V-1B(wt.%) alloy. The PM rolled Ti-6Al-4V-1B alloy exhibited a duplex microstructure, and it did not exhibit a strong α-phase texture compared with the PM extruded Ti-6Al-4V-1B alloy. The PM rolled Ti6Al-4V-1B alloy exhibited gre...
متن کاملCharacterization of the Dendritic Microstructure of Investment Cast Alloy 718
The as-cast alloy 718 shows a multiphasic structure which consists of dendrites, carbides and Laves phases. The amount, size, shape, and dispersion of these phases affect the properties and the processing which follows, This structure was characterized by measurements of volume fraction, size, dispersion, and shape factor of carbide and Laves phases. Secondary arm spacing and Vickers hardness w...
متن کاملCharacterization of loose powder sintered porous titanium and Ti6Al4V alloy
Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the corresponding powders and utilized sintering temperatures limited the final porosities in the range 30-37.5 vol. %. Similar to wrought alloys, compression stress-strain curve...
متن کاملNonlinear Ultrasonic Guided Waves for Microstructure Characterization of Hollow Cylinders
The issue of non-destructive characterization of material microstructure with respect to precursors to macroscale damage initiation is addressed. Ultrasonic guided waves are known to be sensitive to material nonlinearity, which is evident through the generation of higher harmonic modes. Thus, nonlinear guided waves have strong potential to identify precursors to macroscale damage and revolution...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Research in Nondestructive Evaluation
سال: 1990
ISSN: 0934-9847
DOI: 10.1080/09349849008968028