Ultrasonic fatigue experiments with biaxial cruciform specimens
نویسندگان
چکیده
منابع مشابه
Redesigning axial-axial (biaxial) cruciform specimens for very high cycle fatigue ultrasonic testing machines
The necessity to increase performances in terms of lifetime and security in mechanical components or structures is the motivation for intense research in fatigue. Applications range from aeronautics to medical devices. With the development of new materials, there is no longer a fatigue limit in the classical sense, where it was accepted that the fatigue limit is the stress level such that there...
متن کاملThe Design of Cruciform Test Specimens for Planar Biaxial Testing of Fabrics for Inflatable Aerodynamic Decelerators
A preliminary analytical study was conducted to investigate the effects of cruciform test specimen geometries on strain distribution uniformity in the central gage section under biaxial loads. Three distinct specimen geometries were considered while varying the applied displacements in the two orthogonal directions. Two sets of woven fabric material properties found in literature were used to q...
متن کاملAn Ultrasonic Guided Wave Method to Estimate Applied Biaxial Loads
ABSTRACT. Guided waves propagating in a homogeneous plate are known to be sensitive to both temperature changes and applied stress variations. Here we consider the inverse problem of recovering homogeneous biaxial stresses from measured changes in phase velocity at multiple propagation directions using a single mode at a specific frequency. Although there is no closed form solution relating pha...
متن کاملFatigue Failure and Damage Analysis of an Anti-roll Bar Subjected to Fatigue Experiments
The available fatigue theories have been examined using simple specimens subjected to bending or tension-compression loads. Therefore, the stress fields have been generally one or two dimensional. Anti-roll bar is a component belongs to the suspension system of the vehicles. In spite of having simple circular section, due to the having several curvatures, this component experiences a three-dime...
متن کاملEnhancing Fatigue Strength by Ultrasonic Impact Treatment
Enhancement in fatigue performance of welded joints by Ultrasonic Impact Treatment (UIT) was evaluated in large-scale specimens having a nominal yield strength of 345 to 690 MPa. Eighteen rolled-beam specimens having welded details at cover plates and transverse stiffeners and eight built-up specimens having only transverse stiffener details were fatigue tested after treating them by UIT. A par...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2019
ISSN: 2261-236X
DOI: 10.1051/matecconf/201930018004