Ultrasonic Fatigue Testing in the Tension-Compression Mode
نویسندگان
چکیده
منابع مشابه
Cumulative Fatigue Damage Under stepwise Tension-Compression Loading
Rock structures are subjected to cyclic tension-compression loading due to a blasting, earthquake, traffic and injection-production in underground storage case. Therefore study the fatigue behavior of rock samples under this type of loading is required. In this study, the accumulated fatigue damage for a Green Onyx rock sample which consisted of only one mineral composition with two-step high-l...
متن کاملFatigue and ultrasonic testing of epoxy-glass composites
Purpose: The purpose of this paper was to find relationship between the degree of strength degradation caused by fatigue and the changes of ultrasonic wave characteristics such as wave velocity and damping coefficient. Design/methodology/approach: Epoxy-glass composites were subjected to oscillatory bending loadings with constant deflection. During fatigue procedure the force needed to achieve ...
متن کاملPulse compression technique applied to ultrasonic nondestructive testing of concrete
The pulse compression technique is successfully and widely used in many fields for improving the signal to noise ratio (SNR); which is especially useful when the environment is noisy and the SNR is poor. Since high frequency ultrasound is strongly attenuated in concrete, only low frequency ultrasound can be used in ultrasonic nondestructive testing (NDT) of concrete. In this study the pulse com...
متن کاملBiomechanical Analysis of CNS Gray Matter in Tension and Compression
The purpose of this study is to survey cross section changes of the animal brain samples during the tension and compression tests and comparison of the experimental results for three animals: bovine, sheep, and rabbit. A linear elastic theory with considering the necking in tension and barreling in compression has been considered for brain tissue. Bridgman method for tension and cross section u...
متن کاملTension–tension fatigue of hybrid composite rods
The tension–tension fatigue behavior was investigated for a hybrid composite rod comprised of a unidirectional carbon fiber core and a glass fiber shell. Fatigue tests were performed at three R-ratios and four maximum applied stress levels (MAS) while recording the secant modulus at each cycle, and acoustic emission (AE) sensors were employed to monitor the activation of fatigue mechanisms. Fat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Visualized Experiments
سال: 2018
ISSN: 1940-087X
DOI: 10.3791/57007