Ultrasonic flexible microextrusion forming of ZK60 Mg alloy at room temperature
نویسندگان
چکیده
منابع مشابه
Imprinting bulk amorphous alloy at room temperature
We present investigations on the plastic deformation behavior of a brittle bulk amorphous alloy by simple uniaxial compressive loading at room temperature. A patterning is possible by cold-plastic forming of the typically brittle Hf-based bulk amorphous alloy through controlling homogenous flow without the need for thermal energy or shaping at elevated temperatures. The experimental evidence su...
متن کاملFlexible Forming of Thin Aluminum Alloy Sheets
Flexible forming is a sheet metal forming process with the application of soft material tooling. In this study, flexible (silicone rubber, SR, and styrene butadiene rubber, SBR) and semi-rigid (polyamide 66, PA) polymeric materials were adopted to make several upper dies which were used in combination with aluminium lower dies. Stamping operations were performed on a thin aluminium alloy sheet ...
متن کاملHeusler alloy showing room temperature half - metallicity at the surface
In this article we investigate the surface spin polarization in a 100 nm Co 2 Cr 0.6 Fe 0.4 Al (CCFA) film grown ex situ epitaxially on MgO(100) with a 10 nm Fe buffer layer by means of spin resolved photoemission. We show that a careful in situ preparation of the sample surface leads to values for the room temperature spin polarization up to 45% at the Fermi level. To our knowledge, this is th...
متن کاملSynthesize of Superparamagnetic Zinc Ferrite Nanoparticles at Room Temperature
Superparamagnetic single phase zinc ferrite nanoparticles have been prepared by coprecipitation method at 20 °C without any subsequent calcination. The composition, crystallite size, microstructure and magnetic properties of the prepared nanoparticles were investigated using X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), transmission electron microscope (TEM)...
متن کاملIntegrated and Flexible High Temperature Ultrasonic Transducers
Thick (> 40μm) ceramic films as piezoelectric ultrasonic transducers (UTs) have been successfully deposited on metallic and graphite/epoxy composite substrates by a spray technique. The characteristics of these UTs are that they (1) can be integrated directly onto the desired planar or curved substrates; (2) may not need couplant; (3) can operate in the transmission and pulse/echo modes with a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2019
ISSN: 1757-899X
DOI: 10.1088/1757-899x/490/5/052007