Ultrasonic Particle Sizing
نویسندگان
چکیده
منابع مشابه
Ultrasonic Sizing of Cracks in Web Geometries
Evaluation of the critical nature of interior cracks in turbine rotor component web regions in order to assess the remaining service life of the parts requires accurate determination of the crack sizes in order to perform fracture mechanics analysis. This analysis is important both in order to retire critically defective parts and in order to return components to service if detected flaws are s...
متن کاملAn Ultrasonic Technique for Sizing Surface Cracks
Rayleigh surface waves are proposed as a non-destructive method to find the depth of surface cracks. The paper describes how dynamic photoelasticity was used to develop an understanding of the subsurface interactions between R-waves and a narrow slot. A frequency analysis of the transmitted wave confirmed that the slot acts as a low pass filter for the high frequency Fourier components of the i...
متن کاملCommercial spectrophotometer for particle sizing.
Particle-size distribution and the concentration of polystyrene particles suspended in water were accurately recovered from the inversion of spectral extinction data measured with a commercial spectrophotometer. The instrument was modified by placing a spatial filter in the collection optics to prevent low-angle scattered light from affecting the measurement of transmitted power. The data were ...
متن کاملOptical particle sizing in backscatter.
Several possibilities for the use of elastic light scattering in the backscatter range (scattering angle theta(s) > 140 deg) for determination of size, velocity, and refractive index of spherical particles are investigated. First the phase Doppler technique is considered. Numerical simulations of light scattering with the Lorenz-Mie theory are used to show that the phase Doppler technique is un...
متن کاملUltrasonic and Megasonic Particle Removal
Particulate surface contamination is one of the major causes of low yields in the semiconductor and other affected industries. The theory of low frequency (ultrasonic) and high frequency (megasonic) cleaning will be presented. Ultrasonic cleaning (less than 100 kHz) is relevant to cleaning of optics and precision parts. Megasonic cleaning (0.8 to 1.2 MHz) is used in semiconductor manufacturing....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KONA Powder and Particle Journal
سال: 1995
ISSN: 0288-4534,2187-5537
DOI: 10.14356/kona.1995008