Uncertainty in air flow calculations using tracer gas measurements

Air Change Measurements Using Tracer Gases

Gas Flow Calculations and Measurements for a Gas Stopping Cell

Along with several other nuclear physics laboratories around the world, the NSCL has undertaken the challenge of stopping a radioactive ion beam in order to make low-energy beams for experiments that require nearly thermal beam energies (precision mass measurements, laser spectroscopy, etc.). As part of the LEBIT (Low Energy Beam and Ion Trapping) Project at the NSCL, a gas stopping station is ...

Estimation of Uncertainty in Tracer Gas Measurement of Air Change Rates

Simple and economical measurement of air change rates can be achieved with a passive-type tracer gas doser and sampler. However, this is made more complex by the fact many buildings are not a single fully mixed zone. This means many measurements are required to obtain information on ventilation conditions. In this study, we evaluated the uncertainty of tracer gas measurement of air change rate ...

Pressure Drop Measurements in Rectangular Micro - Channel Using Gas Flow

Due to the need for practical cooling technologies which could dissipate high heat fluxes, an experimental study of pressure drop in micro-channel was performed. In this work, laminar flow friction factors were determined using gas (air) as flow medium. Pressure drop vs flow rate data were used to evaluate friction factors in two parallel microchannels, namely MCP1 and MCP2 (1.0 mm deep x 0.240...

Automated Tracer Equipment for Air Flow Studies in Buildings