Upper Bound Limit Analysis of Anisotropic Soils
نویسندگان
چکیده
منابع مشابه
An Upper Bound Analysis of Sandwich Sheet Rolling Process
In this research, flat rolling process of bonded sandwich sheets is investigated by the method of upper bound. A kinematically admissible velocity field is developed for a single layer sheet and is extended into the rolling of the symmetrical sandwich sheets. The internal, shear and frictional power terms are derived and they are used in the upper bound model. Through the analysis, the rolling ...
متن کاملBearing Capacity of Strip Footings near Slopes Using Lower Bound Limit Analysis
Stability of foundations near slopes is one of the important and complicated problems in geotechnical engineering, which has been investigated by various methods such as limit equilibrium, limit analysis, slip-line, finite element and discrete element. The complexity of this problem is resulted from the combination of two probable failures: foundation failure and overall slope failure. The curr...
متن کاملAn Upper Bound Approach for Analysis of Hydroforming of Sheet Metals
Considering a kinematical velocity admissible field, the upper bound method has beenused for predicting the amount of pressure in hydroforming of sheet metals. The effects of workhardening, friction and blank size have been considered in pressure prediction. Also the effect ofsheet thickness variation has been considered in the present work formulations. The relation betweenpressure and punch s...
متن کاملUpper Bound Analysis of Tube Extrusion Process Through Rotating Conical Dies with Large Mandrel Radius
In this paper, an upper bound approach is used to analyze the tube extrusion process through rotating conical dies with large mandrel radius. The material under deformation in the die and inside the container is divided to four deformation zones. A velocity field for each deformation zone is developed to evaluate the internal powers and the powers dissipated on all frictional and velocity disco...
متن کاملAn Upper Bound Solution for Analysis of Twist Extrusion Process with Elliptical Die Cross-section
Twist extrusion process is a rather new route to produce highly strained materials. In this process, severe plastic deformation is applied by large shear strains. In current article, required energy for twist extrusion by use of admissible velocity field together with the upper bound technique is predicted. The proposed model is capable of considering the effect of various parameters such as di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computers, Materials & Continua
سال: 2020
ISSN: 1546-2226
DOI: 10.32604/cmc.2020.04662