Usage of UV-curable oligomer-based adhesive agent in hermatypic coral experimental research
نویسندگان
چکیده
منابع مشابه
Preparation and Properties of UV curable urethane methacrylate oligomer
N,N-dihydroxyethyl methylacrylamide (DHEMAA), which is a methacrylate modified by diol, has been prepared by reaction of diethylanol amine with methyl methacrylate. UV curable urethane methacrylate oligomers have been synthesized by the reaction of a series of diol, triol, DHEMAA and HEMA with TDI or IPDI in two reaction orders. The first reaction style is the TDI or IPDI reacted with HEMA firs...
متن کاملUv-curable Release Coating and Adhesive Formulations Containing Vinylethers
Vinylether monomers offer unique properties for UV/EB curing due to their efficiency as reactive diluents and their ability to undergo both cationic homopolymerization and free-radical copolymerization. The benefits derived from the inclusion of vinylethers into commercial UVcurable epoxysilicone formulations include viscosity reduction, improved cationic photoinitiator miscibility, and lower c...
متن کاملDesign and UV-curable behaviour of boron based reactive diluent for epoxy acrylate oligomer used for flame retardant wood coating
Difunctional boron-containing reactive flame retardant for UV-curable epoxy acrylate oligomer was synthesized from phenyl boronic acid and glycidyl methacrylate. The synthesized reactive diluent was utilized to formulate ultraviolet (UV)-curable wood coatings. The weight fractions of reactive diluent in coatings formulation was varied from 5 to 25 wt % with constant photoinitiator concentration...
متن کاملInkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices.
Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-print...
متن کاملLow-temperature, simple and fast integration technique of microfluidic chips by using a UV-curable adhesive.
In the fields of MicroElectroMechanical Systems (MEMS) and Lab On a Chip (LOC), a device is often fabricated using diverse substrates which are processed separately and finally assembled together using a bonding process to yield the final device. Here we describe and demonstrate a novel straightforward, rapid and low-temperature bonding technique for the assembly of complete microfluidic device...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MethodsX
سال: 2019
ISSN: 2215-0161
DOI: 10.1016/j.mex.2019.06.007