Using Air-HAST to Accelerated Reliability Test on Surface Corrosion
نویسندگان
چکیده
منابع مشابه
Bias-HAST on tape ball grid array (TBGA) test pattern
Tape ball grid array (TBGA) rather than the traditional BGA, can provide a more flexible, light weight and fine pitch interconnection method to the electronic industry. In this study, two different designs of TBGA, buss-out and buss-in, were used thought-out this investigation. Moreover, for those samples were then further sub-divided, one with hot deionized (DI) rinsing after solder resist dev...
متن کاملUsing Accelerated Testing To Predict Module Reliability Preprint
Long-term reliability is critical to the cost effectiveness and commercial success of photovoltaic (PV) products. Today most PV modules are warranted for 25 years, but there is no accepted test protocol to validate a 25-year lifetime. The qualification tests do an excellent job of identifying design, materials, and process flaws that are likely to lead to premature failure (infant mortality), b...
متن کاملUsing Accelerated Life Tests Results to Predict Product Field Reliability
Accelerated life tests (ALTs) provide timely assessments of the reliability of materials, components, and subsystems. ALTs can be run at any of these levels or at the full-system level. Sometimes ALTs generate multiple failure modes. A frequently asked question, coming near to the end of an ALT program, is “What do these test results say about field performance?” ALTs are carefully controlled w...
متن کاملSoftware reliability assessment using accelerated testing methods
The use of operational pro®les and usage-based testing has received considerable attention recently in the software engineering literature. Testing under the actual operational pro®le can, however, be expensive, time consuming or even infeasible in situations where the performance of a system is dominated by infrequent but highly critical events. We consider a real application that deals with t...
متن کاملMitigation of Corrosion on Magnesium Alloy by Predesigned Surface Corrosion
Rapid corrosion of magnesium alloys is undesirable in structural and biomedical applications and a general way to control corrosion is to form a surface barrier layer isolating the bulk materials from the external environment. Herein, based on the insights gained from the anticorrosion behavior of corrosion products, a special way to mitigate aqueous corrosion is described. The concept is based...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2019
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.70.297