Using two tools movement in incremental forming process by finite element analysis
نویسندگان
چکیده
منابع مشابه
Finite element simulation of two-point incremental forming of free-form parts
Two-point incremental forming method is considered a modern technique for manufacturing shell parts. The presence of bottom punch during the process makes this technique far more complex than its conventional counterpart i.e. single-point incremental forming method. Thus, the numerical simulation of this method is an essential task, which leads to the reduction of trial/error costs, predicts th...
متن کاملOptimization of the strain distribution in the roll forming process using the desirability function and finite element methods
Defects of the roll forming process are affected by amount and situation of the strains distribution. The effect of the process parameters on the strain distribution in the round cross section roll forming process has been studied. Finite element and response surface method have been used for process modelling. Then desirability functions approach and overlaid counter plots have been employed f...
متن کاملViscoelastic Stress Analysis of Precision Aspherical Glass Lens Forming Process using Finite Element Method
The conventional production of lenses is a rather complicated process. Glass raw material which has been pressed to a rough form has to be processed on both sides in order to obtain a finished precision optical component. There have been recent advances in the optical fabrication techniques such as magnetorheological polishing (MRF), ion beam polishing and single point diamond turning (SPDT), b...
متن کاملIncremental Grammar Development using Finite State Tools
Finite State parsing tools are generally optimized for run-time efficiency. But a field linguist needs compile-time efficiency, so that incremental changes can be made quickly as new morphemes are discovered and grammar rules revised. Using an available finite state toolkit, the Xerox xfst program, I show how incremental changes can be rapidly compiled by extracting the set of morphemes which c...
متن کاملDetermination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, Buckling Limit of Strain (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when buck...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2017
ISSN: 2261-236X
DOI: 10.1051/matecconf/201711202004