Utilization of Leather Waste Fibers in Polymer Matrix Composites Based on Acrylonitrile-Butadiene Rubber
نویسندگان
چکیده
منابع مشابه
Gloves against mineral oils and mechanical hazards: composites of carboxylated acrylonitrile–butadiene rubber latex
Resistance to permeation of noxious chemical substances should be accompanied by resistance to mechanical factors because the glove material may be torn, cut or punctured in the workplace. This study reports on glove materials, protecting against mineral oils and mechanical hazards, made of carboxylated acrylonitrile-butadiene rubber (XNBR) latex. The obtained materials were characterized by a ...
متن کاملmechanical and morphological properties of short nylon fiber reinforced acrylonitrile-butadiene rubber composites
acrylonitrile butadiene rubber (nbr) composites are prepared from waste nylon 66 short fiber using a two-roll mill mixer. the effects of fiber content and bonding agent on the mechanical and morphological properties of the composites are studied. the curing characteristics of the composites have been studied by using cure rheometer. the cure and scorch time of the composites decrease while cure...
متن کاملDevelopment and Characterization of Polymer Eco-Composites Based on Natural Rubber Reinforced with Natural Fibers
Natural rubber composites filled with short natural fibers (flax and sawdust) were prepared by blending procedure and the elastomer cross-linking was carried out using benzoyl peroxide. The microbial degradation of composites was carried out by incubating with Aspergillus niger recognized for the ability to grow and degrade a broad range of substrates. The extent of biodegradation was evaluated...
متن کاملBarrierity of hydrogenated butadiene-acrylonitrile rubber and butyl rubber after exposure to organic solvents.
Resistance of antichemical clothing primarily depends on the type of material it is made from, in particular on the type of polymer used for coating the fabric carrier. This paper reports on systematic investigations on the influence of the cross-linking density of an elastomer and the composition of a cross-linked elastomer on its resistance to permeation of selected organic solvents. Tests of...
متن کاملsynthesis of ethylene bis-stearamide for acrylonitrile-butadiene-styrene polymer
ethylene bis-stearamide is one of the important acrylonitrile-butadiene-styrene ()abs)( polymer additives, which is used as lubricant, slip agent and mold release agent. in this research, ethylene bis-stearamide for abs application was synthesized using stearic acid and ethylene diamine under reflux condition. refluxing prevented ethylenediamine from evaporation and thus the initial molar ratio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2020
ISSN: 2073-4360
DOI: 10.3390/polym13010117