Utilization of Waste Glass in Autoclaved Aerated Concrete
نویسندگان
چکیده
منابع مشابه
Numerical simulation for the drying shrinkage of autoclaved aerated concrete
A mathematical model for the description of drying shrinkage of autoclaved aerated concrete (AAC) is presented, bringing together the hygrothermal and mechanical considerations. The verification of the model is done using an approximation of a real laboratory experiment. Then, the applicability of the model is demonstrated by a numerical simulation of drying shrinkage and wetting expansion of A...
متن کاملFibre reinforced autoclaved aerated concrete studied by computed tomography
The production process of fibre reinforced autoclaved aerated concrete results in a preferential orientation of the fibres. The fibre orientation largely influences the strength and the deformation behaviour of this building material, therefore information on the fibre orientation is highly desirable. Computed tomography measurements allow for the non destructive investigation of the material. ...
متن کاملAn Attempt to Reduce Materials Cost of Autoclaved Aerated Concrete Production
Background: Municipal solid waste incineration (MSWI) bottom ash contains a not insignificant amount of metallic aluminum, while circulating fluidized bed combustion (CFBC) fly ash is rich in active SiO 2. To reduce the materials cost of autoclaved aerated concrete (AAC) production, these two types of solid waste could theoretically be used as the aerating agent and silica source, respectively....
متن کاملUtilization of Solid Wastes (waste Glass and Rubber Particles) as Aggregates in Concrete
Post-consumer glass represents a major component of solid waste. On the other hand, more than 100 million tons of coal combustion ash are generated in the U.S. annually, of which 60 million tons are fly ash. To deal with these problems, two new materials were developed: “glascrete” and “ashcrete.” They have the potential of being made almost entirely from recycled materials: crushed mix-color w...
متن کاملDevelopment of an in Situ X-ray Diffraction System for Hydrothermal Reactions and Its Application to Autoclaved Aerated Concrete Formation
An in situ time-resolved X-ray diffraction (XRD) system for hydrothermal reaction has been developed in order to investigate the phase evolution during autoclave process in autoclaved aerated concrete (AAC) formation. The system includes a novel autoclave cell for transmission XRD with thin beryllium windows, a two-dimensional photon-counting pixel array detector, and uses high energy X-rays fr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2015
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2015.10.040