UV-curable polyurethane-acrylate hybrids made by a prepolymer-free process and free-standing polymer–metal oxide films made in a wholly water-based UV curing process
نویسندگان
چکیده
UV curing formulations obtained by acid base interaction between tertiary amine containing urethane and acrylic acid.
منابع مشابه
Fabrication and study of structural, optical and electrical properties of UV curable conductive polyurethane acrylate films containing polyaniline-Co3O4 nanocomposites
In this research, Novel UV curable conductive nanocomposites containing urethane acrylate and PANi-Co3O4 nanocomposite have been prepared. At first, PANi- Co3O4 nanocomposites have been synthesized and then PUA-PANi-Co3O4 nanocomposites films were prepared by ultraviolet radiation. UV-Vis and FT-IR studies confirm that there was strong chemical interaction between PANi and Co3O4 nanoparticles, ...
متن کاملStudy the curing behavior and mechanical properties of Pigmented UV curable epoxy acrylate monomers
The formulations contained different acrylate monomer with different structure and functionalities and TiO2, were applied to obtain pigmented acrylic films by UV exposure. The conversion and mechanical characteristic were correlated. The results showed that there is a significant interaction between pigment, reactive diluents’ type and mechanical properties of coatings. It seems that cured film...
متن کاملCan-Printing Process Uses UV-Curable Coating
Approximately 100 billion aluminum cans are produced annually, mainly for the beverage industry. Early technologies for decorating the cans often used solvent-based coatings containing solvents at concentrations of -70% to 75% by volume (Randall 1992). The solvent composition was typically a mixture of aliphatic hydrocarbons, aromatics, ethers, cellosolves, and acetates. Unfortunately, this met...
متن کاملMicrofluidic Devices Made of Uv-curable Glue (noa81) for Fluorescence Detection Based Applications
The UV-curable adhesive NOA81 (Norland Optical Adhesive) is a promising liquid photopolymer for low-cost microfluidic chip production. Different fabrication methods for NOA81 are suggested [1,2]. However, optical characterization for fluorescent based detection systems is missing. We present a comparison of fluorescent emission spectra of various NOA types as well as the time evolution of the s...
متن کاملWater-soluble UV curable urethane methyl acrylate coating: preparation and properties.
Two kinds of water-soluble and ultraviolet (UV) curable oligomers were synthesized and characterized. The oligomers were evaluated as resins for water-based UV curable coating. The rheology of the two oligomers' aqueous solutions was investigated in terms of solid fraction, pH dependence, and temperature dependence. The solutions were found to be Newtonian fluid showing rather low viscosity eve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Chemistry
سال: 2023
ISSN: ['1759-9962', '1759-9954']
DOI: https://doi.org/10.1039/d3py00517h