Validation of Noise Prediction Theory Using Scaled Rotor Experiment for Hovering Condition
نویسندگان
چکیده
منابع مشابه
Experimental Investigation ofthe Hovering Performance of aTwin-Rotor Test Model
Hover performance of a twin-rotor test model in terms of rotor overlap sweep, blade collective pitch, and blade tip speedwasexaminedexperimentally.The experimental setup consisted of two three-bladed rotors (tandem rotor configuration) with a diameter of1,220 mm and constant chord of 38 mm, giving a blade aspect ratio of 16.05. The blades were of a rectangular planform with NACA 0012 cross-sect...
متن کاملFinite element model updating of a geared rotor system using particle swarm optimization for condition monitoring
In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data, iezoel...
متن کاملanalysis of ruin probability for insurance companies using markov chain
در این پایان نامه نشان داده ایم که چگونه می توان مدل ریسک بیمه ای اسپیرر اندرسون را به کمک زنجیره های مارکوف تعریف کرد. سپس به کمک روش های آنالیز ماتریسی احتمال برشکستگی ، میزان مازاد در هنگام برشکستگی و میزان کسری بودجه در زمان وقوع برشکستگی را محاسبه کرده ایم. هدف ما در این پایان نامه بسیار محاسباتی و کاربردی تر از روش های است که در گذشته برای محاسبه این احتمال ارائه شده است. در ابتدا ما نشا...
15 صفحه اولCoupled CFD/CSD Analysis of a Hovering Rotor Using High Fidelity Unsteady Aerodynamics and a Geometrically Exact Rotor Blade Analysis
Abstract: This paper presents a combination of a computational structural dynamics (CSD) and high fidelity unsteady computational fluid dynamics (CFD) analysis. Regarding a helicopter in hover, aerodynamic loads are computed from the three-dimensional Navier-Stokes solver in overlapped grids, and blade motions are obtained from the geometrically exact rotor beam analysis. To couple those analys...
متن کاملDesign, Fabrication and Hovering Performance Study of Nano Coaxial Rotor
A nano coaxial rotor was designed, fabricated and studied experimentally at an ultralow Reynolds number ranging from 5000 to 20,000. The Minimum Induced Loss theory was employed to optimize the geometry of nano coaxial rotor with the introduction of weights to take into account the interference of upper rotor and lower rotor. The chord and twist distributions of both rotors were achieved as a r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society for Aeronautical & Space Sciences
سال: 2012
ISSN: 1225-1348
DOI: 10.5139/jksas.2012.40.3.201