Vaporization Thermodynamics and Enthalpy of Formation of Aluminum Silicon Carbide

Thermodynamics of Enthalpy Relaxation and Hole Formation of Polymer Glasses

formation and evolution of regional organizations: the case study of the economic cooperation organization (eco)

abstract because of the many geopolitical, geo economical and geo strategically potentials and communicational capabilities of eco region, members can expand the convergence and the integration in base of this organization that have important impact on members development and expanding peace in international and regional level. based on quality analyzing of library findings and experts interv...

Circumstellar aluminum oxide and silicon carbide in interplanetary dust particles

A systematic NanoSIMS isotope imaging study of sub-micrometer phases in interplanetary dust particles (IDPs) has led to the discovery of two presolar grain types that previously were observed only in primitive meteorites. A 350 · 600 nm Al2O3 grain has a large O enrichment and a slight O depletion, as well as a Mg excess due to the decay of extinct Al. Because of its relatively large size and p...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Experimental study of fracture mechanics in the aluminum matrix composites containing Fifteen percent silicon carbide particles

In this investigation ‚the fracture toughness of A356 containing15%SiC composite was studied. Al/SiC composites have been considered because of their mechanical and erosion properties .Low fracture toughness in Al/SiC as compared with Aluminium alloys is one of its disadvantage. In this study at first A356 alloy was melted in a smelting electrical furnace then poured into the mould. A356-15% Si...