Variation in Crack Growth Properties and Its Effect on Fatigue Crack Growth Life for Al 7075-T6

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ionic Inhibition of Environmental Fatigue Crack Growth in 7075-t6

The objective of this study is to quantify and understand the effectiveness of a hexavalent chrome replacement ion to inhibit environmentally assisted fatigue crack propagation (EFCP) in high strength aluminum alloys. Because of dynamic-cyclic stress (or strain) loading, fatigue degradation occurs at stress levels considerably lower than the tensile or yield strength; degradation is exacerbated...

متن کامل

Enhanced Exponential Fatigue Crack Growth Model for Al-alloy

In the present investigation, an attempt has been made to use “exponential model” in the prediction of fatigue life without integrating the fatigue crack growth rate curve (FCGR). The obtained results are compared with experimental crack growth data obtained for 2024-T351 aluminum alloy for four bending V-Charpy specimens under constant amplitude loading in stress ratio range from 0.1 to 0.3 an...

متن کامل

Short and Large Crack , Mixed - Mode Fatigue - Crack Growth Thresholds in Ti - 6 Al - 4 V

There are few experimental results to date describing the crack-propagation threshold behavior of short fatigue cracks under multiaxial loading conditions. To address this need, in the present study, the variation in mixed-mode, high-cycle fatigue-crack growth thresholds with crack size and shape are reported for a Ti-6Al-4V turbine blade alloy, heat treated to two widely different microstructu...

متن کامل

The Fracture Mechanics Concept of Creep and Creep/Fatigue Crack Growth in Life Assessment

There is an increasing need to assess the service life of components containing defect which operate at high temperature. This paper describes the current fracture mechanics concepts that are employed to predict cracking of engineering materials at high temperatures under static and cyclic loading. The relationship between these concepts and those of high temperature life assessment methods is ...

متن کامل

On Crack Closure and Crack Tip Shielding during Fatigue Crack Growth

Fatigue crack growth can be strongly influenced by crack closure, i. e., the contacting of the opposing faces of a fatigue crack above the minimum load in a loading cycle. This crack closure shields the crack tip from the full stress field, but different views are held regarding the extent of this shielding. The type of closure, whether it be plasticity-induced, or roughness-induced may also pl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Academic Perspective Procedia

سال: 2018

ISSN: 2667-5862

DOI: 10.33793/acperpro.01.01.203