VELOCITY OF SOUND IN SOLIDS

Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350

In the present work, the influence of aging temperature on mechanical properties and sound velocity of Maraging steel M350 was investigated. For this purpose, first, samples were solution annealed at 825◦C for 2 hours and then age hardened at 510◦C-600◦C for 3 hours. Hardness, tensile and impact tests were used for determining mechanical properties and longitudinal ultrasonic velocity was used ...

Sound velocity in carbon suboxide.

Settling velocity characterization of aquacultural solids

A top-loading settling column is described and used to characterize the settling properties of the solids in the discharge water from a commercial rainbow trout production facility. Mass-based and phosphorus-based settling curves are presented. The median settling velocity on a mass-basis for the settleable solids was 1.7 cm s. The median settling velocity for the settleable phosphorus was 1.15...

Visualization of Transducer-Produced Sound Fields in Solids

Broadband ultrasonic pulses and monochromatic ultrasonic waves are visualized in various transparent solids using a photoelastic visualization technique. Application is made to the characterization of the sound field radiated by various ultrasonic transducers operating under various excitation and coupling

Sound field separation with sound pressure and particle velocity measurements.

In conventional near-field acoustic holography (NAH) it is not possible to distinguish between sound from the two sides of the array, thus, it is a requirement that all the sources are confined to only one side and radiate into a free field. When this requirement cannot be fulfilled, sound field separation techniques make it possible to distinguish between outgoing and incoming waves from the t...