Verification of Experimental Hysteresis Loops for Exterior Beam-Column Joint Under Lateral Cyclic Load

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

performance of exterior precast concrete beam-column dowel connections under cyclic loading

the present study focuses on the performance of precast concrete beam-column dowel connections subjected to cyclic loading by conducting experiments. in this study, one-third scale model of two types of precast and a monolithic beam-column connection were cast and tested under reverse cyclic loading. the precast connections considered for this study is a beam-column connection where beam is con...

متن کامل

Finite Element Analysis of Reinforced Concrete Column Under Lateral Load

To serve its purpose a structure must be safe against collapse and serviceable in use. Serviceability requires that deflections be adequately small to keep the cracks within tolerable limits. Although the widely followed ACI Code suggests a detailed method of deflection calculation, it often cannot exactly perceive the actual behavior of a structure. For this purpose, finite element analysis, u...

متن کامل

Numerical Simulation with Fibre Beam-column Models of Thin Rc Column Behaviour under Cyclic Tension-compression

Damage to structural walls in the recent earthquakes in Chile (2010) and New Zealand (2011) demonstrated that modern reinforced concrete (RC) wall behaviour can be largely governed by out-of-plane displacements triggered by instability. Thin walls are the most vulnerable to this deformation mechanism, especially if they have a single layer of reinforcement. These wall types can be easily found ...

متن کامل

Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE)

In this study, the behavior characteristics of I beam-to-concrete filled tube (CFT) column connection is studied through experiment and finite element models under the monotonic loading. To validate the finite element modeling, at first, an experimental model is made and experimented. After validation of the finite element modeling, different models were created in the software. The studied par...

متن کامل

R/C Existing Structures with Smooth Reinforcing Bars: Experimental Behaviour of Beam-Column Joints Subject to Cyclic Lateral Loads

Abstract: The paper illustrates the results of experimental tests performed on sub-assemblages of R/C (Reinforced Concrete) existing structures, designed only for gravity loads In order to estimate failure mechanisms and ductility properties, four internal and external R/C beam-column joints were built and tested. The specimens were built by using concrete with low strength and smooth reinforci...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IOP Conference Series: Earth and Environmental Science

سال: 2021

ISSN: 1755-1307,1755-1315

DOI: 10.1088/1755-1315/644/1/012034