Vertical–Horizontal Coupling Vibration of Hot Rolling Mill Rolls under Multi-Piecewise Nonlinear Constraints

Experimental Research on Durability in Exploitation of Rolling Mill Rolls

Having in view the statistical data calculated for 10 years, the total consumption of rolling mill rolls represents 0 785...0 8 kg/tone of rolled steel. Nationwide, the 5 million tones steel being rolled every year represents a consumption of 4000 tones rolls, worth 6 million euro/year, which imposes large research with an important economic and scientific impact [1-6] It is noticeable that app...

Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading

The defect in work rolls directly influence the forming cost and the final shape of the product. The researchers tend to investigate the thermo-mechanical stress in work roll of rolling machines. These stresses may reduce the roll life. Since the investigation of the thermo-mechanical stress in work roll with real-conditions is complex, comprehensive studies by means of numerical methods are av...

Fault Diagnosis of Roll Shape under the Speed Change in Hot Rolling Mill

The metal processing system usually consists of various components such like motors, work rolls, backup rolls, idle rolls, sensors, etc. Even a simple fault in a single component in the system may cause a serious damage on the final product. It is therefore necessary to diagnose the faults of the components to detect and prevent system failure. Especially, the defects in a work roll are critica...

Multivariable controller design for a hot rolling mill

Metallurgically Consistent Determination of Steel Hot Strength Using Process Data from Hot Strip Mill Rolling

It is not rare to observe an inverse relationship between hot strength determined from rolling load of the finishing stands of the hot strip mill and strain. This situation was already described in the literature and is explained by the use of inverse rolling load models that assumes sticking friction in the determination of hot strength. The aim of this work was to show that this “work softeni...