Very Tall Wooden Buildings with Cross Laminated Timber

Cross Laminated Timber Construction for Resisting Lateral Loads on Six Level Buildings

The author’s intention is to contribute to the general discussion on timber multi-level commercial buildings. Interest in this topic is expected due to the environmental advantages of timber construction when compared to concrete and steel. This paper looks into three timber based systems for resisting lateral loads for buildings to six storeys, that will ensure relatively ‘open’ floor spaces. ...

Ambient vibration tests of a cross-laminated timber building

Energy Saving and Carbon Reduction in the Operation Stage of Cross Laminated Timber Residential Buildings in China

This paper focused on energy consumption and carbon emission for heating and cooling during a building’s operation stage, and examined the energy effects of using Cross Laminated Timber (CLT) as an alternative building material to reinforced concrete (RC) in China’s 31 key cities located in different climate zones. The authors designed two seven-story residential buildings, which were construct...

Bending Properties of Cross Laminated Timber (CLT) with a 45° Alternating Layer Configuration

Bending tests were conducted with cross laminated timber (CLT) panels made using an alternating layer arrangement. Boards of Norway spruce were used to manufacture five-layer panels on an industrial CLT production line. In total, 20 samples were tested, consisting of two CLT configurations with 10 samples of each type: transverse layers at 45° and the conventional 90° arrangement. Sample dimens...

Feasibility of glued laminated timber beams 1 with tropical hardwoods

11 A feasibility study of glulam was carried out in French Guiana using local wood species. The aim 12 was to determine gluing parameters affording satisfactory behaviour to manufactured glulam in 13 a tropical climate. 14 Three abundant wood species, with special properties, were selected for the study and 15 Resorcinol-Phenol-Formaldehyde resin was used for bonding. Three industrial parameter...