Vibration analysis of milling process with helix-angle cutter based on Euler method
نویسندگان
چکیده
منابع مشابه
Modeling and Analysis for Five-Axis High Speed Milling Process Based on Cutter Optimal Kinematics Performance
The overall goal of the research is the integration of geometric and mechanistic models for cutting process simulation and feedrate optimization. Five-axis milling methods are used in industries such as aerospace, automotive and mold for free-form surface machining. In these process, surface quality and material removal rate are of very important. Conservative cutting parameters have been mostl...
متن کاملEffects of Helix Angle Variations on Stability of Low Immersion Milling
The stability behavior of low immersion helical end milling processes is investigated in this paper. Low radial immersion milling operations involve interrupted cutting which induces chatter vibration under certain cutting conditions. Time Finite Element Analysis (TFEA) is suggested for an approximate solution for delayed differential equations encountered during interrupted milling. An improve...
متن کاملExperimental Study on Milling CFRP with Staggered PCD Cutter
Carbon fiber reinforced plastics (CFRP) have good physical properties, such as high specific strength and high specific modulus. However, cutting delamination, tearing and burr, etc. often occur in the machining process of CFRP, which results in the uncontrollability of machining surface quality and serious tool wear. In this paper, milling of CFRP with a staggered cutter was carried out, the c...
متن کاملStudy of the effective cutter radius for end milling of free-form surfaces using a torus milling cutter
متن کامل
Spectrally formulated finite element for vibration analysis of an Euler-Bernoulli beam on Pasternak foundation
In this article, vibration analysis of an Euler-Bernoulli beam resting on a Pasternak-type foundation is studied. The governing equation is solved by using a spectral finite element model (SFEM). The solution involves calculating wave and time responses of the beam. The Fast Fourier Transform function is used for temporal discretization of the governing partial differential equation into a se...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2019
ISSN: 1757-899X
DOI: 10.1088/1757-899x/592/1/012084