Vibration in a Cracked Machine Tool Spindle with Magnetic Bearings
نویسندگان
چکیده
منابع مشابه
Vibration in a Cracked Machine Tool Spindle with Magnetic Bearings
Due to manufacturing flaws or cyclic loading, cracks frequently appear in a rotating spindle system. These cracks markedly affect the dynamic characteristics in higher modes of the rotating machinery. For faster rotational speeds, especially for super-high-speed cutting, a spindle with magnetic bearings is necessary. However, most investigations into spindle system dynamic characteristics have ...
متن کاملA miniature milling spindle with Active Magnetic Bearings
This paper describes the design and realization of a miniature milling spindle with Active Magnetic Bearings (AMBs). Permanent magnet biased, reluctance type actuators position the rotor in five Degrees of Freedom (DOF), leaving the rotation unconstrained. A rotordynamic model was developed to expedite the controller design, and enabled modeling of the spindle’s performance under the influence ...
متن کاملThe Critical Speeds of a Machine Tool Spindle- Bearing System with the High Stiffness Hydrostatic Journal Bearings
INTRODUCTION The ordinary hydrodynamic bearings have been replaced by the hydrostatic bearings in the application of machine tools in recent years. For the hydrodynamic bearings, the journal and the bearing surface are separated by the sliding action with a wedge pressure-generating mechanism to develop a pressure within the bearing. It has advantages of simple structure and cheap cost. However...
متن کاملFatigue Behavior Optimization of the 16MnCr5 Steel Used in Machine Tool Spindle via Different Surface Treatments
Since the sub-axis of machine tool spindles subjected to fatigue loading, the effects of different surface heat treatments on fatigue behavior of 16MnCr5 steel have been investigated in the current work. After the test specimens were prepared from the steel, the surface heat treatments; carburizing, carbonitriding and a practical type of treatment involving the first nitriding then carburizing ...
متن کاملMethod for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect
Bearing defects are one of the most important mechanical sources for vibration and noise generation in machine tool spindles. In this study, an integrated finite element (FE) model is proposed to predict the vibration responses of a spindle bearing system with localized bearing defects and then the sensor placement for better detection of bearing faults is optimized. A nonlinear bearing model i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Mechanical Engineering Journal
سال: 2008
ISSN: 1874-155X
DOI: 10.2174/1874155x00802010032