Vibration Measuring Method Using Acoustic Tube.
نویسندگان
چکیده
منابع مشابه
Study of the Frictional Surface Damage Using Acoustic Emission Method
In this study, the change at rubbing surfaces has been investigated experimentally using an acoustic emission signal monitoring system. A steel ring is slipped on the surface of a metallic sheet to simulate frictional conditions. The mechanical disturbances caused by the movement of the ring produce stress waves propagating along the sheet surface. The out of plane displacement of the sheet su...
متن کاملBlast vibration modeling using linear superposition method
A linear superposition method was used for modeling the time history of the production blast vibrations and optimizing the blast sequence to reduce vibration levels in Sar-Cheshmeh copper mine, Kerman, Iran. A single-hole blast for modeling and two double-hole blasts with time delays of 25 and 65 ms between two holes for modeling validation were carried out. The generated vibrations were measur...
متن کاملMeasuring Norwegian dialect distances using acoustic features
Computational dialectometry has been proven to be useful for finding dialect relationships and identifying dialect areas. The first to develop a method of measuring dialect distances was Jean Séguy, assisted and inspired by Henri Guiter (Chambers and Trudgill, 1998). Strongly related to the methodology of Séguy is the work of Goebl, although the basis of Goebl’s work was developed mainly in dep...
متن کاملVertical-Vibration Suppressing Design of Accumulator with New Vibration-Measuring Method
A compressor was developed using R32 which was a low GWP R32 refrigerant for coping with global warming. However, there is a tendency for vibrations of a compressor to also increase because the circulation of refrigerant increases according to specification for using R32 refrigerant. Since large vibrations of a compressor causes outdoor units to generate solid propagation sound, there is a need...
متن کاملAn experimental method for measuring transfer functions of acoustic tubes
This work proposes an experimental method for direct measurement of transfer functions of acoustic tubes. The method obtains a pressure-to-velocity transfer function from measurement of input volume velocity and output pressures of a target tube. Steady sinusoidal waves from 100 Hz to 5 kHz with a 10-Hz increment were used as a source signal. Experimental results compared with transmission line...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 2000
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.66.1836