Visualization of bubbly flow using an ultrasonic array sensor
نویسندگان
چکیده
منابع مشابه
Shape Recognition and Position Measurement of an Object Using an Ultrasonic Sensor Array
Shape recognition of a transparent object is usually difficult to perform by image processing techniques, because the major portion of the light projected onto an object passes through the object. As a result, the object cannot gain the light intensity required for image processing. Ultrasonic sensors are often utilised in situations where such optical sensors cannot be used. Moreover, systems ...
متن کاملMeasurement of Reynolds Stress in Bubbly Flow Using Ultrasonic Doppler Method
Microscopic structure in bubbly flows is a topic of interest in the study of fluid flows. In the present paper, the Ultrasonic Doppler Method was applied to the measurement of bubbly flows from which Reynolds stress profiles were obtained. Experiments were carried out for an air-water dispersed bubbly flow in a 20mm x 100 mm vertical rectangular channel having a void fraction smaller than 3%. T...
متن کاملan infinite planar array of rectangular microstrip patch antenna analysis
the methods which are used to analyze microstrip antennas, are divited into three categories: empirical methods, semi-empirical methods and full-wave analysis. empirical and semi-empirical methods are generally based on some fundamental simplifying assumptions about quality of surface current distribution and substrate thickness. thses simplificatioms cause low accuracy in field evaluation. ful...
15 صفحه اولPhased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملPhased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Visualization Society of Japan
سال: 2008
ISSN: 0916-4731,1884-037X
DOI: 10.3154/jvs.28.1097