Visualization of Coolant Flow inside Transformer Coil
نویسندگان
چکیده
منابع مشابه
Laboratory current transformer based on Rogowski coil
This paper cover the analysis and construction of current to voltage transducer based on Rogowski coil which satisfy the requirements of high-accuracy measurement of AC current (up to 20 A at power supply frequency, with the aiming uncertainty of 100 parts per million). Primary source of ac current uncertainty measured by this type of transducer is nonuniform density of turns which, in case of ...
متن کاملSingle-phase Coolant Flow and Heat Transfer
1) Hydraulic Analysis of the Emergency Core Spray System in a BWR The emergency spray system of a BWR delivers cold water to the core after a large-break loss of coolant accident has emptied the reactor vessel. The system comprises a large water pool, a pump, a spray nozzle and connecting pipes (Figure 1). All pipes are smooth round tubes made of stainless steel with 10 cm internal diameter. Th...
متن کاملFlow Visualization Around a Non - Circular Tube
The flow behavior around a cam shaped tube in cross flow has been investigated experimentally using flow visualization and pressure distribution measurement. The range of attack angle and Reynolds number based on an equivalent circular diameter are within 0 ≤ α ≤ 360˚ and 2 x 104 < Reeq < 3.4 x 104, respectively. The pressure drag features are clarified in relation to the flow behavior around t...
متن کاملTop-down Flow Transformer Networks
We study the deformation fields of feature maps across convolutional network layers under explicit top-down spatial transformations. We propose top-down flow transformer (TFT) by focusing on three transformations: translation, rotation, and scaling. We learn flow transformation generators that are able to account for the hidden layer deformations while maintaining the overall consistency across...
متن کاملPrevention of hot spot temperature in a distribution transformer using magnetic fluid as a coolant
A MneZn ferrite magnetic fluid (TCF-56) having 5.6 mT fluid magnetization and high pyromagnetic coefficient, (vM/vT 1⁄4 177 A/m K) has been investigated as a coolant in a 3 kW prototype transformer for overloading condition (167%). The winding temperature of a transformer submerged in magnetic fluid reaches at 396.8 K after 3 h of overloading, which is 20 K lower, when the same experiment was c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Visualization Society of Japan
سال: 1994
ISSN: 1884-037X,0916-4731
DOI: 10.3154/jvs.14.supplement1_51