Vortex Laser Based on a Plasmonic Ring Cavity

نویسندگان

چکیده

The orbital angular momentum (OAM) of the structure light is viewed as a candidate for enhancing capacity information processing. Microring has advantages in realizing compact lasers required on-chip applications. However, clockwise and counterclockwise whispering gallery modes (WGM) appear simultaneously, emitted from normal microring does not possess net OAM. Here, we propose an OAM laser based on standing-wave WGMs containing WGM components. Due to inhomogeneous intensity distribution WGM, single-mode lasing can be realized. Besides, designed demand. principle properties proposed are demonstrated by numerical simulations. This work paves way exploring plasmonic at microscale, which served basic building block optical devices.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Plasmonic Adder/Subtractor Module Based on a Ring Resonator Filter

A four port network adder-subtractor module, for surface plasmon polariton (SPP) waves based on a ring resonator filter is proposed. The functionality of module is achieved by the phase difference manipulation of guided SPPs through different arms connected to the ring resonator. The module is designed using the concepts of a basic two-port device proposed in this paper. It is shown that two po...

متن کامل

Design and Simulation of a Metal-Insulator-Metal Filter Based on Plasmonic Split Ring

In this paper, a plasmonic filter made of a split ring, two U-shaped structures and two straight waveguides is designed and investigated. In the proposed structure, the split ring and U-shaped structures are situated between straight waveguides. Simulations are done based on FDTD method. Split ring, U-shaped structures and straight waveguides are made of air in the silver background. In the pro...

متن کامل

Plasmonic external cavity laser refractometric sensor.

Combining the high sensitivity properties of surface plasmon resonance refractive index sensing with a tunable external cavity laser, we demonstrate a plasmonic external cavity laser (ECL) for high resolution refractometric sensing. The plasmonic ECL utilizes a plasmonic crystal with extraordinary optical transmission (EOT) as the wavelength-selective element, and achieves single mode lasing at...

متن کامل

Alignement of a ring cavity laser

This manual describes a procedure to align the cavity of our Ti:Sapphire ring laser and its injection with an Argon-Ion pump laser beam. The setup is shown in figure 1. An 8W Argon-Ion pump beam is adjusted in size and degree of divergence by a telescope consisting of a 62mm and an 88mm lens (L1 and L2). A periscope (mirrors P1 and P2) and a collimation lens C (f=175 mm) is used to inject the 5...

متن کامل

Characterization of an external cavity diode laser based ring cavity NICE-OHMS system.

The performance of an external cavity diode laser based noise immune cavity enhanced optical heterodyne molecular spectrometer is presented. To reduce the noise on the signal a ring cavity and a circuit to remove residual amplitude modulation on the pre-cavity laser radiation was implemented. We demonstrate a sensitivity of 4 x 10(-11) cm(-1) Hz(-1/2) using a cavity with a finesse of 2600 on a ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Crystals

سال: 2021

ISSN: ['2073-4352']

DOI: https://doi.org/10.3390/cryst11080901