$W$ -Band Waveguide Filters Fabricated by Laser Micromachining and 3-D Printing
نویسندگان
چکیده
منابع مشابه
An 11.5 W Yb:YAG planar waveguide laser fabricated via pulsed laser deposition
We present details of the homo-epitaxial growth of Yb:YAG onto a <100> oriented YAG substrate by pulsed laser deposition. Material characterization and initial laser experiments are also reported, including the demonstration of laser action from the 15 μm-thick planar waveguide generating 11.5 W of output power with a slope efficiency of 48%. This work indicates that under appropriate condition...
متن کاملPhotonic band-gap fiber gas cell fabricated using femtosecond micromachining.
Femtosecond laser drilling is used to produce a variablepressure fiber gas cell. Tightly focused laser pulses are used to produce micrometer-diameter radial channels in a hollow-core photonic band-gap fiber (HC-PBGF), and through these microchannels the core of the fiber is filled with a gas. The fiber cell is formed by fusion splicing and sealing the ends of the HC-PBGF to standard step-index ...
متن کاملYtterbium-Doped Glass Waveguide Laser Fabricated by Ion Exchange
A ytterbium-doped, glass, channel waveguide laser, fabricated by ion exchange, is reported. The 2.2-cm long device, using broad-band 4% output couplers, lased in the vicinity from 1020 to 1030 nm when pumped by a Ti : sapphire laser operating at 910 nm. A lasing threshold of 50 mW (launched pump) and a slope efficiency of 5% were measured. Device parameters, including fluorescence lifetimes, em...
متن کاملOptical waveguide filter fabricated by excimer laser irradiation
Ge-SiO2 thin films highly photosensitive to excimer laser light were deposited by plasma enhanced chemical vapor deposition. In this paper, the following two studies are reported: (1) Direct writing of the channel waveguide was successfully confirmed only by irradiation with excimer laser through a Cr mask pattern, which was previously coated on the slab waveguide by sputtering method. Bragg gr...
متن کاملDesign of 2-D Half-Band Filters and Fan Filters Using 1-D One-Band Filters by GA Approach
This paper reveals that there exists a closed relationship between 2-D half-band filters and fan filters. It is also found that the complex conventional 2-D design methods can be replaced by the design of 1D filters only for design both filters. Furthermore, an effective GA approach is proposed for designing FIR digital filters. By minimizing a quadratic measure of the error in the frequency ba...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Microwave Theory and Techniques
سال: 2016
ISSN: 0018-9480,1557-9670
DOI: 10.1109/tmtt.2016.2574839