Water-based acrylic coatings reinforced by PISA-derived fibers
نویسندگان
چکیده
منابع مشابه
IR-reflective Opaque Water-based Acrylic Coatings on White Pine Wood Substrates
Two sets of opaque water-based acrylic coatings were prepared with IR-reflective pigments and conventional pigments. The objective of this work was to determine the efficiency of IR-reflective pigments in limiting the heat buildup of opaque coating formulations. Experiments performed on PVC substrates revealed that IR-reflective pigments significantly decreased the temperature increase above ro...
متن کاملPolyurethane Coatings Reinforced by Halloysite Nanotubes
The pencil hardness of a two-component polyurethane coating was improved by adding halloysite nanotubes to the recipe at a weight fraction of less than 10%. The pencil hardness was around F for the unfilled coating and increased to around 2H upon filling. It was important to silanize the surface of the filler in order to achieve good coupling to the matrix. Sonicating the sample during drying a...
متن کاملFlexural Behavior of Cementitious Composites Reinforced by Synthetic Fibers
The application of fibers to reinforce cementitious materials is a well-known subject. At first, asbestos fibers are used in industrial process to produce fiber reinforced cement sheets. Thereafter, various types of synthetic fibers are produced and used as asbestos substitutes. The aim of the present work is to evaluate the effect of synthetic fibers on the flexural behavior of cementitious co...
متن کاملMechanical properties of hot curing acrylic resin after reinforced with different kinds of fibers
Background. Acrylic resins used in restorative dentistry are the most popular denture base material, because they have good optical properties and small solubility in body fluids. However their mechanical properties are limited and therefore acrylic resins require different methods of reinforcement one of which can be application of different kinds of fibers. Objectives. To investigate the effe...
متن کاملImproved fatigue life of acrylic bone cements reinforced with zirconia fibers.
Poly(methyl methacrylate) (PMMA) bone cements have a long and successful history of use for implant fixation, but suffer from a relatively low fracture and fatigue resistance which can result in failure of the cement and the implant. Fiber or particulate reinforcement has been used to improve mechanical properties, but typically at the expense of the pre-cured cement viscosity, which is critica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Chemistry
سال: 2017
ISSN: 1759-9954,1759-9962
DOI: 10.1039/c7py00302a