Waveform Sampler CAMAC Module
نویسندگان
چکیده
منابع مشابه
Multi - Hit Time - to - Amplitude Camac Module
A Multi-H% Time-to-Amplitude Module (MTAC) for the SI.AC Mark III drift chamber system has been designed to measure drift time by converting time-proportional chamber signals into analog levels, and converting the analog data by slow readout via a semi-autonomous controller in a CAMAC crate. The single width CAMAC module has 16 wire channels, each with a 4-hit capacity. An externally generated ...
متن کاملCamac Driver Support for Windows Nt@ and Linux@ Camac Driver Support for Windows Nt@ and Linuxs
Disclaimer This report was prepared as an account of work sponsored b y an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process discl...
متن کاملA Compact Time Digitizer in Camac Format*
A compact time digitizer containing 128 words of 16 bits each on a single width CAMAC module is described. Eight data channels are provided with a capacity of 16 words each. The unit has been used with a 50-MHz clock to encode data from magnetostrictive spark chambers and--with modifications--for the accumulation of data from multiwire proportional chambers. * Work supported by the Energy Resea...
متن کاملPci to Camac Executive Crate Connection
TRIUMF’s Central Control System has a large investment in CAMAC. To protect this investment but allow the current trend of PCI-bus based computers to be supported, TRIUMF has configured a PCI to CAMAC system. In this setup, TRIUMF has connected PCI based computers into the CAMAC equipment of their Central Control System. DEC Alpha computers running OpenVMS have been interfaced via the PCI bus t...
متن کاملSmart Analogue Sampler for the Optical Module of a Cherenkov Neutrino Detector
A transient waveform sampler/recorder IC has been developed and realized in AMS C35B4 technology. This chip has been designed to fit the needs of a proposal for a front-end architecture for the readout of the anode signal of the photomultipliers in an underwater neutrino telescope. The design is based around a 3 channels x 32 cells switched capacitor array unit sampling its voltage inputs at 20...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Nuclear Science
سال: 1986
ISSN: 0018-9499,1558-1578
DOI: 10.1109/tns.1986.4337054