WC/Co Interface Structure in VC-doped WC-Co Alloy
نویسندگان
چکیده
منابع مشابه
Surface roughness characterization of thermally sprayed and precision machined WC–Co and Alloy-625 coatings
Surface roughness characterization of thermally sprayed and precision machined WC–Co and Alloy-625 coatings was carried out. The objectives were to demonstrate that such difficult-to-machine coating surfaces could be machined with commercial machines and tools, and to characterize the surface finish of the machined coatings. The coatings were obtained using two thermal spraying processes: arc s...
متن کاملExchange Bias and Inverse Magnetocaloric Effect in Co and Mn Co-Doped Ni2MnGa Shape Memory Alloy
Exchange bias effect observed in the Ni1.68Co0.32Mn1.20Ga0.80 alloy confirms the coexistence of antiferromagnetic and ferromagnetic phases in the martensite phase. A large inverse magnetocaloric effect has been observed within the martensitic transformation temperature range, which is originated from modified magnetic order through magnetic-field-induced phase transformation from partially anti...
متن کاملDeposition and Characterization of Si-Doped Diamond Films Using Tetraethoxysilane onto a WC-Co Substrate
Silicon-doped (Si-doped) diamond films were deposited on a Co-cemented tungsten carbide (WC-Co) substrate using the hot filament chemical vapor deposition (HFCVD) method with a mixture of acetone, tetraethoxysilane (TEOS), and hydrogen as the recant source. The as-deposited doped diamond films were characterized with field emission scanning electron microscopy (FE-SEM), Raman spectrum, and X-ra...
متن کاملبررسی رفتار سایشی کامپوزیت‌های WC-10wt%Co تجاری، WC-40vol%Co و WC-40vol%FeAl-B در دمای محیط
در این پژوهش رفتار سایشی کامپوزیت‌های تجاری WC-10wt%Co (H10F)، WC-40vol%Co و کامپوزیت‌های WC-40vol%FeAl-B با مقادیر مختلف بور از صفر تا ppm1000 به روش پین روی دیسک بررسی شد. آزمون‌های سایش در دمای محیط، تحت بار 40 نیوتن و طی مسافت 100 متر انجام شدند. سطوح سایش به وسیله میکروسکوپ الکترونی روبشی (SEM) مورد بررسی قرار گرفت. نتایج نشان داد که در بین نمونه‌ها، کامپوزیت WC-40vol%FeAl بدون بور کمترین ...
متن کاملResidual Stress in Ground WC-Co Coatings
High velocity oxygen fuel (HVOF) spray technique is one of the leading technologies that have been proposed as an alternative to the replacement of electrolytic hard chromium plating in a number of engineering applications. In this study, WC-Co powder was coated on AISI1045 steel using high velocity oxy fuel (HVOF) method. The sinψ method was used to evaluate the through thickness residual stre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 2006
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.45.880