Wear Properties of Alumina Particles Reinforced Aluminium Alloy Matrix Composite
نویسندگان
چکیده
منابع مشابه
Effect of heat treatments at 520oC on an aluminium alloy matrix composite reinforced with Ni3Al powder particles
The effect of heat treatment at 520oC on Si and Mg in 6061/5% volume Ni3Alp composite was investigated. Si atoms diffused through the Al3Ni reaction product to form a Sicontaining Al3Ni2 phase with variable amounts of Si, whereas Mg accumulated at matrixAl3Ni interphases. As a consequence, the 6061 alloy lost its age harden ability.
متن کاملMechanical properties of aluminium-based metal matrix composites reinforced with -alumina platelets
The tensile properties of an aluminium-based metal matrix composite reinforced with a-alumina platelets were investigated from an experimental and a theoretical point of view. An increase in Young modulus, 0,2% proof stress, flow stress and ultimate tensile strength was observed over the unreinforced metal. These improvements were obtained at the expense of the tensile ductility. The experiment...
متن کاملUltrasonic assisted turning of an aluminium-based metal matrix composite reinforced with SiC particles
In this study, diamond turning of an aluminiumbased metal matrix composite (MMC) reinforced with SiC particles was conducted with the assistance of ultrasonic vibrations. A simple and small size vibration device was designed to mount a piezoelectric transducer and a diamond insert onto a CNC machine. Turning experiments were carried out using a factorial design to investigate the effects of vib...
متن کاملStudy on damping capacity and dynamic Young’s modulus of aluminium matrix composite reinforced with SiC particles
The development of high damping materials for noise reduction and attenuation of vibration on structural applications, such as automotive and aerospace industries, has been investigated. This experimental study is concerned with the damping capacity (tan delta) and dynamic Young’s modulus (|E*|) of Silicon carbide (SiC) reinforced aluminium (Al) matrix composite. AlSi-SiCp composite was produce...
متن کاملan investigation into the wear behaviour of aluminum (aa2124) matrix composite reinforced with intermetallic mosi2 particles
in the present work, the aa2124/25vol.%mosi2 composite was produced by powder metallurgy technique. the aluminum alloy 2124 powder was produced by gas atomization method and the mosi2 intermetallic particles were produced through combustion synthesis. the aa2124 matrix powder was mechanically blended with 25vol.%mosi2 using a ball milling mixer. the blended powder mixture was encapsulated and t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Sciences
سال: 2011
ISSN: 1812-5654
DOI: 10.3923/jas.2011.1673.1677