منابع مشابه
Weld Overlay Examination Using Ultrasonic Phased Array Technology
Weld overlay of piping was first used as a method to repair components of simple configurations which were known to contain cracking. An adequate ultrasonic examination of these geometries can be achieved by using a few conventional search units. Currently the application of pre-emptive weld overlays as a mitigation technique and/or to improve the examination surface condition for more complex ...
متن کاملSolid Particle Erosion of Thermal Sprayed Coatings
Solid particle erosion is an important material degradation mechanism. Although various methods of coating are tried and used for protection against erosion, thermal sprayed coating for such purpose is the most widely used method. In this chapter, evolution of thermal sprayed coating, erosion testing methods, and erosive wear of thermal sprayed coatings are discussed extensively with emphasis o...
متن کاملI / RESIDUAL STRESS DISTRIBUTION IN FeAl WELD OVERLAY ON STEEL
Neutron diffraction was used to measure the residual stress distribution in an FeAl weld overlay on steel. It was found that the residual stresses accumulated during welding were essentially removed by the post-weld heat treatment that was applied to the specimen; most residual stresses in the specimen developed during cooling following the post-weld heat treatment. The experimental data were c...
متن کاملNext Generation Coatings for Erosion-Corrosion Protection Sprayable protection in extreme erosion environments
The erosion-corrosion environments found in fluid conveying components such as pipelines, pumps, agitators and chutes have important implications for both service life and maintenance cost. The destructive synergy wrought when corrosion occurs in combination with erosion can be many times greater than the sum of each mechanism acting in isolation. A factory applied coating, if present, will hav...
متن کاملApplication of Polyacrylamide for Splash Erosion Control on Marl Soil
Splash erosion is recognized as the first stage in the process of erosion that results in bombardment of the soil's surface with rain drops. Two basic processes in soil erosion are the dispersement of soil particles by rain drops and the changes caused to the soil's structure, which are then moved by runoff. In this research,the effect of various polyacrylamide (PAM)values (0, 0.2, 0.4 and 0.6 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Wear
سال: 1995
ISSN: 0043-1648
DOI: 10.1016/0043-1648(94)07088-1