Wetting and Drying Characteristics of Recycled Asphalt Pavement-Fly Ash Blend as a Sustainable Pavement Material
نویسندگان
چکیده
منابع مشابه
Leaching Characteristics of Recycled Asphalt Pavement: RAP May Be Suitable As a Fill Material
A procedure for stabilization/solidification of loose waste from the manufacture of Ni and Cd electrodes, which represents a nonutilizable and noncombustible hazardous waste, has been worked out. The procedure comprises solidifying the waste by means of an anionic slow-setting aqueous-asphalt emulsion with subsequent formation of an asphalt coating on the surface of solidified waste by spraying...
متن کاملThe use of stabilized fly ash as a green material in pavement substructure: A review
Fly ash is a waste produced in coal-fired thermal power stations. It has pozzolanic properties and can therefore be stabilized to achieve higher strength and durability required for use as pavement substructure specifically as subbase or base layer material. The stabilization of fly ash can be achieved by adding either cement, lime or other materials. Stabilization of fly ash with available ind...
متن کاملAn Introduction to Tire/Pavement Noise of Asphalt Pavement
1.0 Introduction ..........................................................................................................................................................2 2.0 Relevant Topics in Sound and Acoustics ............................................................................................................... 2.1 Sound...............................................................
متن کاملRecyclability of Concrete Pavement Incorporating High Volume of Fly Ash
Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Materials Science and Engineering
سال: 2017
ISSN: 2572-889X
DOI: 10.12783/dtmse/ictim2017/9895