Wheel-rail rolling contact behavior induced by both rail surface irregularity and sleeper hanging defects on a high-speed railway line

نویسندگان

چکیده

In this study, a wheel-rail transient rolling contact model capable of accounting for the nonlinear displacement-force properties hanging sleepers is proposed. The sleeper status affected by rail irregularities an input analysis behavior and related degradation in terms plastic deformation fatigue. results indicate that severity significantly geometric characteristics relative position with respect to surface irregularity. defects aggravate impact increase force amplitude, patch size, pressure, von Mises stress, thus exacerbating material. It was also found rarely affect distribution adhesion-slip states knowledge gained can serve as guidance evaluating condition conducting maintenance ballasted railway tracks.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A new solution method for wheel/rail rolling contact

To solve the problem of wheel/rail rolling contact of nonlinear steady-state curving, a three-dimensional transient finite element (FE) model is developed by the explicit software ANSYS/LS-DYNA. To improve the solving speed and efficiency, an explicit-explicit order solution method is put forward based on analysis of the features of implicit and explicit algorithm. The solution method was first...

متن کامل

Impacts of Wheel–rail at Railway Turnouts

Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh-&#10Timoshenko beam elements. The ra...

متن کامل

Impacts of Wheel–rail at Railway Turnouts

Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh- Timoshenko beam elements. The rail...

متن کامل

Contact Force Estimation in the Railway Vehicle Wheel-Rail Interface

Increased patronage of railways in the UK in the past 20 years has put demands on rolling stock to operate at peak availability with reduced time available for maintenance. One possible tool to enable this is the use of real time fault detection and diagnosis on board railway vehicles to detect faulty components and provide information about the current running condition of the system. This pap...

متن کامل

Investigation of the Influences of Track Superstructure Parameters on Ballasted Railway Track Design

The main design criteria of ballasted railway tracks include rail deflections, rail bending stresses, rail wheel contact stresses, sleeper bending moments and ballast sleeper contact pressures. Numerous criteria have been defined for the design of ballasted railway tracks owing to the various mechanical properties of track components and their complex interaction. Therefore, railway track desig...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Engineering Failure Analysis

سال: 2021

ISSN: ['1350-6307', '1873-1961']

DOI: https://doi.org/10.1016/j.engfailanal.2021.105604