Wide-Range Bolometer With RF Readout TES
نویسندگان
چکیده
منابع مشابه
A TES Bolometer for THz FT-Spectroscopy
We recently reported on a Transition Edge Sensor (TES) composite bolometer for Fourier Transform spectroscopy which was designed, built and characterized. The design is based on a superconducting thermistor with SQUID readout, SiN membrane technology and a thin film metal mesh absorber which is optimized for the spectral range from 0.1 THz to 3 THz. A noise equivalent power (NEP) of 3.8×10-13 W...
متن کاملAntenna-Coupled TES Bolometer Arrays for CMB Polarimetry
We describe the design and performance of polarization selective antenna-coupled TES arrays that will be used in several upcoming Cosmic Microwave Background (CMB) experiments: SPIDER, BICEP-2/SPUD. The fully lithographic polarimeter arrays utilize planar phased-antennas for collimation (F/4 beam) and microstrip filters for band definition (25% bandwidth). These devices demonstrate high optical...
متن کاملWide Tuning Range Active RF Bandpass Filter with MOS Varactors
The paper presents an improved tuning method implemented for a differential active inductor based RF bandpass filter. Derived from a previous designed transistor-only second order filter topology, independent frequency and quality factor tuning are demonstrated in 0.18 μm CMOS technology. The circuit has been basically designed for a maximum frequency of 2.4 GHz, high enough to cover the main w...
متن کاملA Wirelessly Powered Smart Contact Lens with Reconfigurable Wide Range and Tunable Sensitivity Sensor Readout Circuitry
This study presented a wireless smart contact lens system that was composed of a reconfigurable capacitive sensor interface circuitry and wirelessly powered radio-frequency identification (RFID) addressable system for sensor control and data communication. In order to improve compliance and reduce user discomfort, a capacitive sensor was embedded on a soft contact lens of 200 μm thickness using...
متن کاملAn RF-DC Converter with Wide-Dynamic-Range Input Matching for Power Recovery Applications
An improved RF–dc converter based on a class-E rectifier with wide-dynamic-range input matching is presented. The input impedance is controlled by two varactor diodes to compensate for impedance changes with RF input power and dc loading conditions. The RF–dc converter achieved a peak efficiency of 60% and an S11 less than −20 dB over an input RF power range of 12 dB and an operating battery vo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Applied Superconductivity
سال: 2015
ISSN: 1051-8223,1558-2515,2378-7074
DOI: 10.1109/tasc.2014.2385090