Window Cleaning Robot with Magnetic Synchronous Drive
نویسندگان
چکیده
منابع مشابه
Odometry Error Model for a Synchronous Drive Robot
Wheel odometry is a common method for mobile robot relative localisation. However, this method is known to suffer from systematic errors. In this paper a comprehensive systematic odometry error model for a synchronous drive robot is proposed. The model addresses the systematic error for both rotational and translational motions. Results on real data show a real potential to produce a significan...
متن کاملOccupational hazards in window cleaning.
Accidental falls involving window cleaners treated at the Middlesex Hospital over five years are reviewed. Failure to use safety belts and the lack of suitable anchorage points were contributary factors in all 20 patients. The use of protective equipment and the provision of anchorage points should be enforced. While the doctor's duty is to treat injuries he also has the opportunity to draw att...
متن کاملThe odometry error of a mobile robot with a synchronous drive system
This paper presents an error modeling of an odometry system for a synchronous-drive system and a possible strategy for evaluating this error. The odometry error is modeled by introducing four parameters characterizing its systematic and nonsystematic components (translational and rotational). The nonsystematic errors are expressed in terms of a covariance matrix, which depends on both the previ...
متن کاملDevelopment of Small-size Window Cleaning Robot by Wall Climbing Mechanism
The objective of this research is to develop the small-size and light weight window cleaning robot. The prototype of window cleaning robot has been developed. The dimensions of prototyped robot are approximately 300mm x 300mm x 100mm and its weight is approximately 3 kg. The prototyped robot consists of two independently driven wheels and an active suction cup. The control system which includes...
متن کاملOptimizing Ultrasonic Cleaning for Disk Drive Components
C leanliness of parts and assemblies has always been an important factor for product yield in the disk drive industry. The challenge is that most disk drive parts are manufactured by conventional material processing methods, such as machining. stamping. and molding. Ultimately, the manufacturing process normally requiring the use of oils, coolants, and abrasive tools becomes the primary source ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Robotics Society of Japan
سال: 2007
ISSN: 0289-1824,1884-7145
DOI: 10.7210/jrsj.25.738