Wire Electrical Discharge Machining of a Hybrid Composite: Evaluation of Kerf Width and Surface Roughness
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کاملParametric Optimization of KERF Width and Surface Roughness in Wire Electrical Discharge Machining (WEDM) of Hybrid Aluminium (Al6061/SIC/GRAPHITE) Composite using TAGUCHI-Based Gray Relational Analysis
In this present investigation, the effect and optimization of machining parameters on the kerf width and surface roughness in wire electrical discharge machining (WEDM) operations of Al 60661 hybrid composite was studied. The hybrid metal matrix composite was fabricated by stir casting process using particulates SiC and graphite each in Al6061 alloy. The experiments were designed with L27 ortho...
متن کاملParametric Optimization for Surface Roughness in Wire Electrical Discharge Machining— A Taguchi Approach
High carbon high chromium alloy tool steels (D-3) with excellent abrasion resistance (HRC: 58-65) are increasingly used in manufacturing high performance cutting tools (dies and punches), blanking and punching tools, extrusion tools, etc. Being a hard material, it is difficult to machine using conventional machining methods. Wire Electric Discharge Machine(WEDM) seems to be a viable option to m...
متن کاملinvestigation of machining parameters in wire electrical discharge machining (wedm) on the surface roughness & cutting speed of tungsten carbide
surface roughness is one of the most important parameters that plays very critical role in determining the quality of engineering components. a good surface quality resulting in improve of fatigue strength, corrosion and wear resistance of the workpiece. on the other hand, increasing cutting speed and decreasing time of machining are desirable for manufacturers in order to reduce costs and incr...
متن کاملPrediction of Surface Roughness in Wire Electric Discharge Machining (WEDM) Process based on Response Surface Methodology
This paper presents an investigation on WEDM of pure titanium (grade-2). An attempt has been made to model the response variable i.e. surface roughness in WEDM process using response surface methodology. The experimental plan is based on Box-Behnken design. Six parameters i.e. pulse on time, pulse off time, peak current, spark gap voltage, wire feed and wire tension has been varied to investiga...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Uludağ University Journal of The Faculty of Engineering
سال: 2016
ISSN: 2148-4155,2148-4147
DOI: 10.17482/uujfe.21303