Wire plus arc additive manufactured functional steel surfaces enhanced by rolling
نویسندگان
چکیده
منابع مشابه
Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing
Cast nickel aluminum bronze (NAB) alloy is widely used for large engineering components in marine applications due to its excellent mechanical properties and corrosion resistance. Casting porosity, as well as coarse microstructure, however, are accompanied by a decrease in mechanical properties of cast NAB components. Although heat treatment, friction stir processing, and fusion welding were im...
متن کاملCharacterization of an Additive Manufactured TiAl Alloy—Steel Joint Produced by Electron Beam Welding
In this work, the characterization of the assembly of a steel shaft into a γ-TiAl part for turbocharger application, obtained using Electron Beam Welding (EBW) technology with a Ni-based filler, was carried out. The Ti-48Al-2Nb-0.7Cr-0.3Si (at %) alloy part was produced by Electron Beam Melting (EBM). This additive manufacturing technology allows the production of a lightweight part with comple...
متن کاملDevelopment of Surface Characterisation Toolbox for Additive Manufactured Components: from Planar Layer Surfaces to Complex Functional Surfaces
The additive manufacturing (AM) technology possesses the potential to change the paradigm for manufacturing. To facilitate the successful uptake of AM technologies into a wider range of applications, AM needs metrological methods to measure, evaluate, validate techniques for both AM processes and AM parts. Two strategies are proposed for the optimisation of AM processes and the evaluation of th...
متن کاملWire Arc Additive Manufacturing of AZ31 Magnesium Alloy: Grain Refinement by Adjusting Pulse Frequency
Wire arc additive manufacturing (WAAM) offers a potential approach to fabricate large-scale magnesium alloy components with low cost and high efficiency, although this topic is yet to be reported in literature. In this study, WAAM is preliminarily applied to fabricate AZ31 magnesium. Fully dense AZ31 magnesium alloy components are successfully obtained. Meanwhile, to refine grains and obtain go...
متن کاملCharacterization of Additive Manufactured Objects
Hybrid Layered Manufacturing (HLM) combines the benefits of both subtractive and Additive Manufacturing (AM). In this paper authors did characterization of AM components by using Kernel Average Misorientation (KAM), Electron Backscatter Diffraction (EBSD) and hardness tester. The main focus is on matrix integrity during Gas Metal Arc Welding (GMAW) deposition and surface quality during machinin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Fatigue
سال: 2020
ISSN: 0142-1123
DOI: 10.1016/j.ijfatigue.2019.105237