Wood Preservative-Pentachlorophenol
نویسندگان
چکیده
منابع مشابه
Modeling of wood preservative leaching in service
To evaluate the potential environmental and health implications of leaching of wood preservatives in service under different conditions, there is a need for a predictive model that provides estimates of the rate and extent of leaching over a wide range of exposure conditions. In this paper, we test the hypothesis that preservative component emissions can be modeled on the basis of three easily ...
متن کاملPreservative leaching from weathered CCA-treated wood.
Disposal of discarded chromated copper arsenate (CCA)-treated wood in landfills raises concerns with respect to leaching of preservative compounds. When unweathered CCA-treated wood is leached using the toxicity characteristic leaching procedure (TCLP), arsenic concentrations exceed the toxicity characteristic (TC) limit of 5mg/L in most cases. The majority of discarded CCA-treated wood, howeve...
متن کاملPolymeric Betaine as a Wood Preservative
Didecyl polyoxyethyl ammonium borate (DPAB), also known as Polymeric Betaine, was developed as a co-biocide for chromium-free copper based wood preservatives in Europe in the 1980’s. This paper summarizes the properties of DPAB as a wood preservative. Unique properties related to the betaine nature of DPAB are discussed in terms of the structureproperty relationship. Physical properties of DPAB...
متن کاملAssessing Potential Waste Disposal Impact from Preservative Treated Wood Products
The management of discarded treated wood products upon disposal is one of the many factors that should be considered when evaluating a new wood preservative or when comparing wood preservatives as part of a life cycle assessment. Future environmental ramifications of disposal, as well as regulatory requirements and costs, must be assessed and weighed. This paper presents an overview of the fact...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1965
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.14.671