Work hardening in selective laser melted Al‐12Si alloy
نویسندگان
چکیده
منابع مشابه
Effects of T2 Heat Treatment on Microstructure and Properties of the Selective Laser Melted Aluminum Alloy Samples
In this paper, aluminum alloy samples were fabricated by selective laser melting (SLM) and subsequently T2 heat treatment was undertaken. In order to obtain comprehensive results, various experiments on densification, hardness, tensile strength, bending strength and microstructure characterization were carried out. The results show that densification of samples after T2 heat treatment does not ...
متن کاملInfluence of Ultrasonic Surface Rolling on Microstructure and Wear Behavior of Selective Laser Melted Ti-6Al-4V Alloy
The present article studied the effect of ultrasonic surface rolling process (USRP) on the microstructure and wear behavior of a selective laser melted Ti-6Al-4V alloy. Surface characteristics were investigated using optical microscope, nano-indentation, scanning electron microscope, transmission electron microscope and laser scanning confocal microscope. Results indicated that the thickness of...
متن کاملMicrostructure of Laser Re-Melted AlCoCrCuFeNi High Entropy Alloy Coatings Produced by Plasma Spraying
An AlCoCrCuFeNi high-entropy alloy (HEA) coating was fabricated on a pure magnesium substrate using a two-step method, involving plasma spray processing and laser re-melting. After laser re-melting, the microporosity present in the as-sprayed coating was eliminated, and a dense surface layer was obtained. The microstructure of the laser-remelted layer exhibits an epitaxial growth of columnar de...
متن کاملStructural Integrity of an Electron Beam Melted Titanium Alloy
Advanced manufacturing encompasses the wide range of processes that consist of "3D printing" of metallic materials. One such method is Electron Beam Melting (EBM), a modern build technology that offers significant potential for lean manufacture and a capability to produce fully dense near-net shaped components. However, the manufacture of intricate geometries will result in variable thermal cyc...
متن کاملMECHANICAL PROPERTIES OF SELECTIVE LASER MELTED AlSi10Mg: NANO, MICRO, AND MACRO PROPERTIES
The selective laser melting (SLM) of aluminium alloys is of great current interest at both the industrial and research levels. Aluminium poses a challenge to SLM compared with other candidate materials, such as titanium alloys, stainless steels, and nickel-based alloys, because of its high thermal diffusivity and low infrared absorptivity and tendency to result in relatively porous parts. Howev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Material Design & Processing Communications
سال: 2019
ISSN: 2577-6576,2577-6576
DOI: 10.1002/mdp2.46